摘要:
A charge transfer implemented by a transfer section for transferring charges stored in image sensor elements along one direction on a surface where the image sensor elements are disposed is halted for a predetermined length of time. The charges are transferred from the transfer section without reading the charges from the image sensor elements after the charge transfer is halted for the predetermined length of time. A position where a defect is generated in an image pickup sensor is identified based on signal levels of the transferred charges. A defective signal level of the image pickup sensor generated on a line including the defect-generating position and in parallel with the one direction is corrected. As a result of the foregoing process, a display failure is precisely corrected.
摘要:
A charge transfer implemented by a transfer section for transferring charges stored in image sensor elements along one direction on a surface where the image sensor elements are disposed is halted for a predetermined length of time. The charges are transferred from the transfer section without reading the charges from the image sensor elements after the charge transfer is halted for the predetermined length of time. A position where a defect is generated in an image pickup sensor is identified based on signal levels of the transferred charges. A defective signal level of the image pickup sensor generated on a line including the defect-generating position and in parallel with the one direction is corrected. As a result of the foregoing process, a display failure is precisely corrected.
摘要:
A large chip includes a first set of branch wires that branch off from a first trunk wire and extend to respective wires so as to be connected to respective bond pads. Each of the branch wires of the first set includes a connection control element and a resistor. A small chip includes a second set of branch wires that branch off from a second trunk wire and extend to respective wires so as to be connected to respective bond pads. Each of the branch wires of the second set includes a connection control element and a resistor. Whether connection is properly made or not between the bond pads is determined by measuring a current value when voltage is applied to first and second test pads.
摘要:
A potential generating circuit comprises a capacitor (4); a ferroelectric capacitor (6) connected in series to the capacitor (4); an output terminal (11); a capacitor (10) for grounding the output terminal (11); a switch (9) for connecting a connecting node (5) between the two capacitors (4, 6) to the output terminal (11); and a switch (1) for connecting the connecting node (5) to the ground; wherein during a first period, with the switches (1) and (9) placed in the OFF state, a terminal (3) is provided with a positive potential and a terminal (7) is grounded; wherein during a second period following the first period, the terminal (3) is grounded and the switch (9) is placed in the ON state; wherein during a third period following the second period, the switch (9) is placed in the OFF state, the switch (1) is placed in the ON state, and the terminal (7) is provided with a positive potential; wherein during a fourth period following the third period, the terminal (7) is grounded; and wherein the first through fourth periods are repeated.
摘要:
The panel interface control device, which eliminates the necessity of newly producing video data for panel display and flexibly responds to a change in the type of display panel, includes a data conversion circuit and an RGB filter circuit that are both programmable and scale up or down a digital video signal for display horizontally and vertically to conform to the screen size of the display panel. An interface section outputs the output of the RGB filter circuit to the display panel as video data.
摘要:
A solid-state image sensing apparatus including a solid-state image sensing device and a signal processing circuit. The solid-state image sensing device includes: a vertical transfer unit, composed of transfer columns corresponding to columns of the light-to-electric conversion elements, operable to transfer, in a vertical direction, signal charges read out from the light-to-electric conversion elements; a horizontal transfer unit operable to receive the signal charges from the vertical transfer unit and transfer them in a horizontal direction. The signal processing circuit converts the signal charges from the horizontal transfer unit into pixel data, and rearranges it into a two-dimensional array. In the rearrangement, the signal processing circuit, per transfer of one piece of pixel data, cyclically selects a line memory out of three line memories, writes a piece of pixel data into the selected line memory, or reads a row of pixel data from the selected line memory.
摘要:
A solid-state image sensing apparatus including a solid-state image sensing device and a signal processing circuit. The solid-state image sensing device includes: a vertical transfer unit, composed of transfer columns corresponding to columns of the light-to-electric conversion elements, operable to transfer, in a vertical direction, signal charges read out from the light-to-electric conversion elements; a horizontal transfer unit operable to receive the signal charges from the vertical transfer unit and transfer them in a horizontal direction. The signal processing circuit converts the signal charges from the horizontal transfer unit into pixel data, and rearranges it into a two-dimensional array. In the rearrangement, the signal processing circuit, per transfer of one piece of pixel data, cyclically selects a line memory out of three line memories, writes a piece of pixel data into the selected line memory, or reads a row of pixel data from the selected line memory.
摘要:
A power supply voltage detection circuit includes a voltage division circuit for linearly dividing a power supply voltage, a reference voltage circuit for providing a reference voltage, and a comparison circuit for comparing the output voltage from the voltage division circuit and the reference voltage from the reference voltage circuit. The power supply voltage detection circuit outputs a signal upon detecting that the power supply voltage is equal to or higher than the reference voltage. A PMOS transistor is provided between the voltage division circuit and the comparison circuit. The PMOS transistor includes a source terminal connected to an output terminal of the voltage division circuit, a drain terminal connected to an input terminal of the comparison circuit, and a gate terminal connected to the ground. Until the output voltage from the comparison circuit is higher than the threshold voltage of the PMOS transistor, the PMOS transistor remains OFF, thereby canceling the input of the output voltage signal from the voltage division circuit to the comparison circuit. Thus, without using external components, the signal is prevented from being erroneously output due to the output voltage from the voltage division circuit rising over, without crossing, the reference voltage from the reference voltage circuit during a sharp rise of the power supply voltage.
摘要:
During an intermittent operation mode, a switch is normally opened and a capacitor with a large capacitance is isolated from a circuit. Under this condition, a power source voltage is intermittently supplied to a driven device. Since a charge/discharge current of the capacitor during the intermittent operation mode is limited to the charge/discharge current of the capacitor with a small capacitance, the power consumption can be lowered. In addition, since no switch exists in the current path from a power source voltage conversion circuit to the driven device, there is no drop, due to a switch, in the voltage supplied from the power source voltage conversion circuit to the driven device. On the other hand, during a continuous operation mode in which power source voltage is continuously provided to the driven device, the switch is normally closed and a capacitor with a large capacitance is connected to the power source system. Then the noise level in the supplied power is lowered.
摘要:
A cell library database includes function information of standard cells which are basic circuits forming a logical device, each of the standard cell comprising at least one of power supply terminal as logical terminals, the function information of the standard cell containing logical information or delay information of the power supply terminal relative to an output terminal, or function information of macro cells which are functional circuits forming a logical device, each of the macro cell comprising at least one of power supply terminals as logical terminals, the function information of the macro cell containing logical information or delay information of said power supply terminals relative to an output terminal. A design aiding system uses the cell library database to execute logical simulation, etc.