摘要:
An oxygen sensor capable of accelerating electrochemical reactions and practically working at a low temperature comprises a solid electrolyte 5, and an outer electrode 31 and an inner electrode 32, provided on the surfaces of the solid electrolyte 5, wherein mixed conductors 11 and 12 capable of adsorbing oxygen molecules and conducting an ionization reaction are provided between the solid electrolyte 5 and the outer electrode 31 and between the solid electrolyte 5 and the inner electrode 32, respectively. The mixed conductors 11 and 12 are porous and have a higher oxygen ion conductivity than that of the solid electrolyte 5 and an electron conductivity substantially equivalent to the oxygen ion conductivity and are made of a fluorite-type oxide or a perovskite-type oxide.
摘要:
An air fuel ratio detecting apparatus by which a stable oxygen ion limit current may be obtained, including a working electrode and a gas diffusion resistance layer laminated in this order on a first surface of a solid electrolyte. An ambient air introduction duct and an electric heater are laminated in this order on a second surface of the electrolyte. The gas diffusion resistance layer is composed of a gas permeation layer and gas shield layer, which is provided on a surface of the gas diffusion resistance layer. Since the surface of the gas permeation layer is covered by the gas shield layer, the gas to be measured enters into the gas diffusion resistance layer from only side faces of gas diffusion resistance layer. A cell is preferably baked in a one-piece manner. A porosity of the gas permeation layer is in a preferable range of from about 2 to about 60%, a thickness of the gas permeation layer is preferably in a range of from about 5 to about 300 .mu.m, and a porosity of the gas shield layer is preferably no more than 10%. Also, the periphery of the cell is preferably covered by a protective layer.
摘要:
An oxygen gas concentration-sensing device comprises a solid electrolyte body which is prepared from an oxygen ion-permeable metal oxide and whose first surface is exposed to the gas to be sensed and the second surface is exposed to a reference gas. First and second electrodes are respectively pressed against the first and second surface of the solid electrolyte body. The first electrode exposed to the gas is covered with a porous gas diffusion-resisting layer. This gas diffusion-resisting layer is chosen to have an average pore-size ranging from 300 .ANG. to 400 .ANG..
摘要:
A protection path reservation method which reserves protection paths to avoid a node failure for each transmission path on a network formed of a plurality of nodes, comprising assuming the nodes as an imaginary failure node in turn in a condition in which the node failure is not present in the network, and selecting N neighbor nodes connected to the imaginary failure node through N links, wherein the imaginary failure nodes sequentially transmit protection path reservation request messages to neighbor nodes, and the nodes which have received the protection path reservation request messages sequentially, one by one, reserve N−1 protection paths starting from the nodes.
摘要:
An image pickup apparatus includes a system controller and a face detector, and can register face data of a photographer for a self-timer shooting mode in advance. In the self-timer shooting mode, the face detector extracts face data of people in a subject field from an image signal. When the system controller determines, on the basis of the extracted face data and the registered face data, that the photographer can be detected, the apparatus starts countdown for automatic shooting. Consequently, the apparatus can pick up an image of the photographer without fail, and the photographer can securely strike a pose within the countdown period of time. Furthermore, the apparatus can determine the countdown period of time optionally, thereby enabling the self-timer shooting to be executed depending on the personality of the photographer.
摘要:
An internal combustion engine includes a connecting rod that connects a crankpin and a piston. The connecting rod has first and second connecting rods, and a guide piston is disposed at a connecting portion between the first and second connecting rods. Deformed portions are formed on a lower end portion of a guide piston and on a balancer weight portion of a crankshaft in order to reduce the whole length of the connecting rod, whereby a bottom dead center of the guide piston is set to a lower position. The engine has improved thermal efficiency by reducing the distance between the crank portion and the piston, increasing the speed of behavior of the piston at a position near a top dead center to reduce thermal energy loss, and preventing generation of knocking.
摘要:
An optical reception apparatus comprises an optical receiver to receive an optical signal from an optical transmission line, an error corrector to correct an error of the received signal and to transmit the error-corrected signal and error rate information before error correction, a judging apparatus to judge transmission quality of the optical transmission line according to the error rate information from the error corrector and a threshold value equal to an error rate lower than an error correction limit of the error corrector, and a selective breaker to transmit the signal whose error is corrected by the error corrector in normal state and to block transmission of the signal whose error is corrected by the error corrector when the judged result by the judging apparatus indicates deterioration of the transmission quality of the optical transmission line.
摘要:
An optical clock multiplier comprises a phase modulator (12) to shift a phase in pulse duration of an input optical clock pulse by &pgr;, a polarization mode dispersion device (16) having a predetermined time difference between first and second polarizations orthogonal to each other to divide an output light from the phase modulator into the first and second polarization components, and a polarization device (20) to extract one of polarization components in a third polarization practically inclined at an angle of 45° against the first polarization and a fourth polarization orthogonal to the third polarization out of the output light from the polarization mode dispersion device.
摘要:
An optical transmitter outputs WDM signal lights comprising signal lights with 100 wavelengths of 10 Gbit/s, onto an optical transmission fiber. In the optical transmission line, a transmission fiber and a local area dispersion compensation fiber are disposed per repeater span defined by an optical amplification repeater, the local area dispersion compensation fiber is for compensating the average chromatic dispersion in the repeater span to become 2 ps/nm/km as well as a dispersion slope to become zero, and a wide area dispersion compensation fiber for compensating the average chromatic dispersion to become −0.2 ps/nm/km as well as the dispersion slope to become zero is disposed per predetermined number of optical repeater spans. The optical transmission fiber comprises a single mode optical fiber with large core diameter having a zero dispersion wavelength at a 1.3 &mgr;m band and plus chromatic dispersion at a signal wavelength band (a 1.55 &mgr;m band). The optical amplification repeater comprises an erbium-doped optical fiber to be pumped by a 0.98 &mgr;m band pumping light.
摘要:
An optical fiber (12a) with a large effective core area and a large chromatic dispersion value is disposed on an input side of signal light, and an optical fiber (12b) with a small effective core area and a small chromatic dispersion value or a chromatic dispersion value of negative polarity is disposed on an output side of the signal light. A pumping light source (14) generates pumping light of 1450 nm to cause Raman amplification of 1550 nm in the optical fiber (12b). The output light from the pumping light source (14) enters the optical fiber (12b) from the back through a WDM optical coupler (16). Provided that y=(Pin−&agr;)/(Pp·10 Log L) where input power of the optical fiber (12a) (i.e. output power of an optical transmitter (10)) is Pin, a total loss of the optical fibers (12a and 12b) is &agr;, pumping power for Raman amplification is Pp, and a total length of the optical fibers (12a and 12b) is L, the relation between ratio x (0≦x≦1) of the optical fiber (12b) and y is expressed as y=6.63×10−2x−0.077. Here, the satisfactory x value is in a range from +0.2 to −0.2 of the y value.