摘要:
It may be determined via monitoring whether a first link partner and/or a second link partner coupled via an Ethernet link has trained or refreshed circuitry and/or has updated at least one parameter. Based on the determination, a corresponding link partner may be trained, refreshed and/or updated. One or more of an echo canceller, a far-end crosstalk canceller and a near-end crosstalk canceller for one or more channels may be configured based on the training, refreshing and/or updating. One or more channels may be silent and/or one or more may be active. Link partners may communicate via one or more of in-band signaling, out-of-band signaling to determine which link partner may monitor and/or which may control or initiate operation. The controlling link partner may be assigned a master mode of operation. Training, refreshing and/or updating for the monitoring link partner may be based on a timer.
摘要:
Aspects of a method and system for programmable data rate thresholds for configurable data rate via inter-packet gap adjustment to support energy efficient networks. In this regard, an inter-packet gap may be adjusted to control a data rate on an Ethernet link. An IPG may be adjusted such that a data rate on a network link may be communicated at a non-standardized rate suited to an audio and/or video stream. An IPG may be adjusted such that data is communicated over the link at a standardized rate. In this regard, adjusting the IPG may compensate for a non-standardized data rate resulting from altering other parameters of the link. The IPG may be adjusted based on a control policy which may govern data rates on a network link. Each of a plurality of inter-packet gaps may be differently adjusted to achieve a desired average data rate on the link.
摘要:
Ethernet network link partners may be configured for operation in a low power mode. The link partners may generate new frames and/or signals and/or may modify characteristics of existing frames and/or signals to be communicated via one or more channels of an Ethernet link during the low power mode. The new and/or modified frames and/or signals may be utilized as refresh frames and/or signals to control communication during low power mode and/or to enable refresh and/or synchronization of the link partners. The new and/or modified frames and/or signals may be generated and/or modified based on a desired frequency distribution and/or spectral density. New and/or modified frames and/or signals may comprise jitter, random and/or pseudo random bit patterns and/or varied bit patterns and/or energy levels. Data packets and/or active idle symbols may be forced during low power mode to mitigate undesired periodic energy.
摘要:
Ethernet network link partners may be configured for operation in a low power mode. The link partners may generate new frames and/or signals and/or may modify characteristics of existing frames and/or signals to be communicated via one or more channels of an Ethernet link during the low power mode. The new and/or modified frames and/or signals may be utilized as refresh frames and/or signals to control communication during low power mode and/or to enable refresh and/or synchronization of the link partners. The new and/or modified frames and/or signals may be generated and/or modified based on a desired frequency distribution and/or spectral density. New and/or modified frames and/or signals may comprise jitter, random and/or pseudo random bit patterns and/or varied bit patterns and/or energy levels. Data packets and/or active idle symbols may be forced during low power mode to mitigate undesired periodic energy.
摘要:
An Ethernet link may comprise a plurality of active and/or silent channels. Training of one or more link partners for one or more silent channels may be triggered based on monitoring training parameters for an active channel. The link partners may be trained for the silent channels and link partners corresponding to the silent channels may be configured according to the training. Training parameters for an active channel may be compared to a threshold or relative change value. The threshold or relative change value may be fixed, may be based on measurement results and/or may be programmable. The link partners may be configured for silent channels for an echo canceller, a far-end crosstalk canceller and/or a near-end crosstalk canceller. The silent channels may be trained based on transmitting a pulse or LDPC frame via the silent channels.
摘要:
An Ethernet link may comprise a plurality of active and/or silent channels. Training of one or more link partners for one or more silent channels may be triggered based on monitoring training parameters for an active channel. The link partners may be trained for the silent channels and link partners corresponding to the silent channels may be configured according to the training. Training parameters for an active channel may be compared to a threshold or relative change value. The threshold or relative change value may be fixed, may be based on measurement results and/or may be programmable. The link partners may be configured for silent channels for an echo canceller, a far-end crosstalk canceller and/or a near-end crosstalk canceller. The silent channels may be trained based on transmitting a pulse or LDPC frame via the silent channels.
摘要:
It may be determined via monitoring whether a first link partner and/or a second link partner coupled via an Ethernet link has trained or refreshed circuitry and/or has updated at least one parameter. Based on the determination, a corresponding link partner may be trained, refreshed and/or updated. One or more of an echo canceller, a far-end crosstalk canceller and a near-end crosstalk canceller for one or more channels may be configured based on the training, refreshing and/or updating. One or more channels may be silent and/or one or more may be active. Link partners may communicate via one or more of in-band signaling, out-of-band signaling to determine which link partner may monitor and/or which may control or initiate operation. The controlling link partner may be assigned a master mode of operation. Training, refreshing and/or updating for the monitoring link partner may be based on a timer.
摘要:
Aspects of a method and system for a distinct physical pattern on an active channel to indicate a data rate transition for energy efficient Ethernet. In this regard, one or more distinct physical patterns may be transmitted on one or more active channels of a network link during an inter-packet gap to control a data rate on the link. The unique physical pattern may be transmitted instead of or in addition to one or more IDLE symbols. The distinct physical pattern may communicate a data rate to be utilized on the link and/or indicate when a data rate transition should occur on the link. The distinct pattern may be transmitted and/or the data rate transition may occur during a specified inter-packet gap or during a specified packet boundary. The distinct physical pattern may comprise one or more control characters and/or an ordered set of voltage levels, symbols, and/or characters.
摘要:
A broadband gateway may be operable to receive network topology information to enable peer-to-peer communications between a first communication device and a second communication device. The first communication device is communicatively coupled to the broadband gateway. The broadband gateway may be operable to handle at least one physical layer connection to at least one corresponding network access service provider. A communication link which may bypass core layer network components and/or resources for enabling the peer-to-peer communications between the first communication device and the second communication device may be established by the broadband gateway, based on the received network topology information, a location of the first communication device and a location of the second communication device. The broadband gateway may establish the communication link to enable the peer-to-peer communications by marking traffic such as by inserting QinQ tags into traffic between the first communication device and the second communication device.
摘要:
A broadband gateway, which that enables communication with a plurality of devices, handles at least one physical layer connection to at least one corresponding network access service provider. The broadband gateway may identify EPG information from service providers. The identified EPG information may be adapted to device attributes such as display resolution, and/or user profiles to generate user-specific EPG information for the corresponding devices. The generated user-specific EPG information may be dynamically configured in response to updates in the identified EPG information, the device attributes and/or the user profiles. The configured user-specific EPG information may be communicated to the corresponding devices, either upon the requests from the devices or by initiation of the broadband gateway, for content selection and/or content scheduling. Advertising content, selected based on analysis of the user behavior and/or the user feedbacks, may be communicated in the user-specific EPG information to the devices to support behavioral marketing.