摘要:
A multiple mode, personal, wireless communications system exists within a radiotelephone network serving general customers and provides additional services to a select group of customers. The system uses handsets which automatically switch between a standard cellular radiotelephone mode of operation and an enhanced cordless mode when the handsets are within range of pico cells that are interconnected to the public switched telephone network. Each pico cell is controlled via a framework of overlay cells that operates independently of the radiotelephone network and uses a unique control protocol on a small number of reserved cellular channels. Each pico cell consists of a spectrally dynamic, non-capturing, frequency agile, multi-purpose base station provided at customer-selected locations to cooperate with the overlay cell framework. Each pico cell is capable of supporting multiple handsets and uses low power operation that achieves limited coverage. Each pico cell reduces traffic on the standard cellular radiotelephone network by independently handling registered handsets. An alternate line option module provides wireless local interconnect capability to selectively route call traffic between land lines and the standard cellular radiotelephone network. Service control units and host stations facilitate wireless activation and control of each pico cell and handset via the overlay cell framework.
摘要:
A multiple mode, personal, wireless communications system is disclosed which exists within a radiotelephone network serving general customers and provides unique additional services to a select group of customers equipped with special handsets, without impacting the general customers. The special handsets automatically switch between and operate in either analog or digital mode with the standard radiotelephone network and in an enhanced cordless mode when within range of independent pico cells, that are interconnected with the public switched telephone network.
摘要:
A cellular radiotelephone system (10) includes mobile stations (28) which may be remotely programmed from a customer activation system (12) to effect activation and other programming needs. Mobile stations (28) are manufactured in a blank form that causes them to operate only in an inactive state. During activation, information describing the mobile station's electronic serial number (ESN) is collected along with area of use information. A mobile identification number (MIN) is assigned in response to the area of use information. A page message is directed to the mobile station operating in its inactive state, but the page message references the mobile station's ESN. While inactive, the mobile station (28) detects pages directed to its ESN. A remote programming session is then performed wherein digital user-specific programming data, including the newly assigned MIN, are transferred to the mobile station (28) over a voice channel using a control channel protocol (80).
摘要:
A radiotelephone (10) simulates the call origination process performed by land-line telephones. Dial tone is generated (78) in response to an off-hook condition and removed when a first digit (54) is dialed. A timer process (84, 110) and a number analysis process (100) simultaneously evaluate dialed digits to detect the completion of dialing. The number analysis process (100) identifies seven, ten, and eleven digit, and indeterminate length phone number formats (64, 66, 52, 68). The ten digit format is recognized in response to remotely programmed (42) connected NPA codes. For most calls, the number analysis process (100) instantly detects a phone number's final digit (62). In a few cases the timer process (84, 110) detects the final digit through the absence of dialing activity for a predetermined duration. When the final digit (62) is detected, an origination message is transmitted to a cellular network.
摘要:
A cellular radiotelephone system (10) includes mobile stations (28) which may be remotely programmed from a customer activation system (12) to effect activation and other programming needs. Mobile stations (28) are manufactured in a blank form that causes them to operate only in an inactive state. During activation, information describing the mobile station's electronic serial number (ESN) is collected along with area of use information. A mobile identification number (MIN) is assigned in response to the area of use information. A page message is directed to the mobile station operating in its inactive state, but the page message references the mobile station's ESN. While inactive, the mobile station (28) detects pages directed to its ESN. A remote programming session is then performed wherein digital user-specific programming data, including the newly assigned MIN, are transferred to the mobile station (28) over a voice channel using a control channel protocol (80).
摘要:
A radiotelephone (10) simulates the call origination process performed by land-line telephones. Dial tone is generated (78) in response to an off-hook condition and removed when a first digit (54) is dialed. A timer process (84, 110) and a number analysis process (100) simultaneously evaluate dialed digits to detect the completion of dialing. The number analysis process (100) identifies seven, ten, and eleven digit, and indeterminate length phone number formats (64, 66, 52, 68). The ten digit format is recognized in response to remotely programmed (42) connected NPA codes. For most calls, the number analysis process (100) instantly detects a phone number's final digit (62). In a few cases the timer process (84, 110) detects the final digit through the absence of dialing activity for a predetermined duration. When the final digit (62) is detected, an origination message is transmitted to a cellular network.
摘要:
A radiotelephone (RT) operates in either a cellular telephone mode or a cordless telephone mode within a cellular telecommunications system. The RT operates in the cordless mode if it is within the operating range of a cordless base station. The cordless base station receives data from a central telephone office, converts the data into a transmittable caller ID message, and transmits the caller ID message to the RT. The RT receives the caller ID message and displays it in a readable form to the user. The caller ID message may be saved at the RT for subsequent retrieval by the user. In addition, a speed dial operation may be performed to respond to the caller ID message.
摘要:
A multiple mode, personal, wireless communications system exists within a radiotelephone network serving general customers and provides additional services to a select group of customers. The system uses handsets (32) which automatically switch between a standard cellular radiotelephone mode of operation (1901) and an enhanced cordless mode (1420) when the handsets (32) are within range of pico cells (26) that are interconnected to the public switched telephone network (20). Each pico cell is controlled via a framework of overlay cells (10b) that operates independently of the radiotelephone network and uses a unique control protocol on a small number of reserved cellular channels. Each pico cell consists of a spectrally dynamic, non-capturing, frequency agile, multi-purpose base station (26) provided at customer-selected locations to cooperate with the overlay cell framework. Each pico cell is capable of supporting multiple handsets (32) and uses low power operation that achieves limited coverage. Each pico cell reduces traffic on the standard cellular radiotelephone network by independently handling registered handsets (32). An alternate line option module (22) provides wireless local interconnect capability to selectively route call traffic between land lines (24) and the standard cellular radiotelephone network. Service control units (12) and host stations (17) facilitate wireless activation and control of each pico cell and handset (32) via the overlay cell framework.
摘要:
A cellular radiotelephone system (10) includes mobile stations (28) which may be remotely programmed from a customer activation system (12) to effect activation and other programming needs. Mobile stations (28) are manufactured in a blank form that causes them to operate only in an inactive state. During activation, information describing the mobile station's electronic serial number (ESN) is collected along with area of use information. A mobile identification number (MIN) is assigned in response to the area of use information. A page message is directed to the mobile station operating in its inactive state, but the page message references the mobile station's ESN. While inactive, the mobile station (28) detects pages directed to its ESN. A remote programming session is then performed wherein digital user-specific programming data, including the newly assigned MIN, are transferred to the mobile station (28) over a voice channel using a control channel protocol (80).
摘要:
A multiple mode, personal, wireless communications system exists within a radiotelephone network serving general customers and provides additional services to a select group of customers. The system uses handsets (32) which automatically switch between a standard cellular radiotelephone mode of operation (1901) and an enhanced cordless mode (1420) when the handsets (32) are within range of pico cells (26) that are interconnected to the public switched telephone network (20). Each pico cell is controlled via a framework of overlay cells (10b) that operates independently of the radiotelephone network and uses a unique control protocol on a small number of reserved cellular channels. Each pico cell consists of a spectrally dynamic, non-capturing, frequency agile, multi-purpose base station (26) provided at customer-selected locations to cooperate with the overlay cell framework. Each pico cell is capable of supporting multiple handsets (32) and uses low power operation that achieves limited coverage. Each pico cell reduces traffic on the standard cellular radiotelephone network by independently handling registered handsets (32). An alternate line option module (22) provides wireless local interconnect capability to selectively route call traffic between land lines (24) and the standard cellular radiotelephone network. Service control units (12) and host stations (17) facilitate wireless activation and control of each pico cell and handset (32) via the overlay cell framework.