摘要:
An AIMD includes a conductive housing, an electrically conductive ferrule with an insulator hermetically sealing the ferrule opening. A conductive pathway is hermetically sealed and disposed through the insulator. A filter capacitor is disposed on a circuit board within the housing and has a dielectric body supporting at least two active and two ground electrode plates interleaved, wherein the at least two active electrode plates are electrically connected to the conductive pathway on the device side, and the at least two ground electrode plates are electrically coupled to either the ferrule and/or the conductive housing. The dielectric body has a dielectric constant less than 1000 and a capacitance of between 10 and 20,000 picofarads. The filter capacitor is configured for EMI filtering of MRI high RF pulsed power by a low ESR, wherein the ESR of the filter capacitor at an MRI RF pulsed frequency or range of frequencies is less than 2.0 ohms.
摘要:
An AIMD includes a conductive housing, an electrically conductive ferrule with an insulator hermetically sealing the ferrule opening. A conductive pathway is hermetically sealed and disposed through the insulator. A filter capacitor is disposed on a circuit board within the housing and has a dielectric body supporting at least two active and two ground electrode plates interleaved, wherein the at least two active electrode plates are electrically connected to the conductive pathway on the device side, and the at least two ground electrode plates are electrically coupled to either the ferrule and/or the conductive housing. The dielectric body has a dielectric constant less than 1000 and a capacitance of between 10 and 20,000 picofarads. The filter capacitor is configured for EMI filtering of MRI high RF pulsed power by a low ESR, wherein the ESR of the filter capacitor at an MRI RF pulsed frequency or range of frequencies is less than 2.0 ohms.
摘要:
A shielded three-terminal flat-through EMI/energy dissipating filter includes an active electrode plate through which a circuit current passes between a first terminal and a second terminal, a first shield plate on a first side of the active electrode plate, and a second shield plate on a second side of the active electrode plate opposite the first shield plate. The first and second shield plates are conductively coupled to a grounded third terminal. In preferred embodiments, the active electrode plate and the shield plates are at least partially disposed with a hybrid flat-through substrate that may include a flex cable section, a rigid cable section, or both.
摘要:
A shielded component or network for an active medical device (AMD) implantable lead includes (1) an implantable lead having a length extending from a proximal end to a distal end, all external of an AMD housing, (2) a passive component or network disposed somewhere along the length of the implantable lead, the passive component or network including at least one inductive component having a first inductive value, and (3) an electromagnetic shield substantially surrounding the inductive component or the passive network. The first inductive value of the inductive component is adjusted to a account for a shift in its inductance to a second inductive value when shielded.
摘要:
An RF filter for an active medical device (AMD), for handling RF power induced in an associated lead from an external RF field at a selected MRI frequency or range frequencies includes a capacitor having a capacitance of between 100 and 10,000 picofarads, and a temperature stable dielectric having a dielectric constant of 200 or less and a temperature coefficient of capacitance (TCC) within the range of plus 400 to minus 7112 parts per million per degree centigrade. The capacitor's dielectric loss tangent in ohms is less than five percent of the capacitor's equivalent series resistance (ESR) at the selected MRI RF frequency or range of frequencies.
摘要:
A load-carrying body for reducing torsional and tensile loading on electrical components in an implantable medical electrical lead includes an electronic component disposed in-line with the implantable medical electrical lead, and a casing for the electronic component. The electronic component has a proximal end conductively coupled to a lead conductor and a distal end conductively coupled to a lead electrode. The casing is mechanically coupled to the lead so as to isolate the electrical component from torque or tensile loads applied to the lead, the lead electrode, or both.
摘要:
A composite RF current attenuator for a medical lead includes a conductor having a distal electrode contactable to biological cells, a bandstop filter in series with the lead conductor for attenuating RF currents flow through the lead conductor at a selected center frequency or across a range of frequencies about the center frequency, and a lowpass filter in series with the bandstop filter and forming a portion of the lead conductor. The bandstop filter has a capacitance in parallel with a first inductance. In a preferred form, the lowpass filter includes a second inductance in series with the bandstop filter, wherein the values of capacitance and inductances for the composite RF current attenuator are selected such that it attenuates MRI-induced RF current flow in an MRI environment.
摘要:
A shielded component or network for an active medical device (AMD) implantable lead includes an implantable lead having a length extending from a proximal end to a distal end, all external of an AMD housing, a passive component or network disposed somewhere along the length of the implantable lead, the passive component or network including at least one inductive component having a first inductive value, and an electromagnetic shield substantially surrounding the inductive component or the passive network. The first inductive value of the inductive component is adjusted to account for a shift in its inductance to a second inductive value when shielded.
摘要:
A bandstop filter having optimum component values is provided for a lead of an active implantable medical device (AIMD). The bandstop filter includes a capacitor in parallel with an inductor. The parallel capacitor and inductor are placed in series with the implantable lead of the AIMD, wherein values of capacitance and inductance are selected such that the bandstop filter is resonant at a selected frequency. The Q of the inductor may be relatively maximized and the Q of the capacitor may be relatively minimized to reduce the overall Q of the bandstop filter to attenuate current flow through the implantable lead along a range of selected frequencies.
摘要:
A shielded three-terminal flat-through EMI/energy dissipating filter includes an active electrode plate through which a circuit current passes between a first terminal and a second terminal, a first shield plate on a first side of the active electrode plate, and a second shield plate on a second side of the active electrode plate opposite the first shield plate. The first and second shield plates are conductively coupled to a grounded third terminal. In preferred embodiments, the active electrode plate and the shield plates are at least partially disposed with a hybrid flat-through substrate that may include a flex cable section, a rigid cable section, or both.