摘要:
Apparatus and methods are disclosed for control of an idle mode in a wireless device. In particular, the idle mode duty cycle of a preamble transmission by an access point (AP), as an example, is variably or adaptively set in response to determined conditions of the wireless neighborhood. The conditions determined include the whether or not other wireless devices are present in the vicinity of sensing wireless device, as well as the state of those devices present, such as whether they are in an idle mode or an active mode.
摘要:
In a wireless communication system, short-term interference mitigation may be used to mitigate (e.g., to avoid or reduce) interference on a given link in order to improve performance of data transmission. The interference mitigation reduces transmit power of interfering transmissions so that a higher signal-to-noise-and-interference ratio (SINR) can be achieved for a desired data transmission. A node may observe high interference from an interfering node that degrades performance of data transmission sent on that link. By taking advantage of an communication path with the interfering node (e.g., wireless data/control channel, backhaul network connection, or analog broadcast signal), the transmitting node can successfully complete time critical communications while allowing the interfering node to also simultaneously communicate without reducing overall resources nor burdening any managing nodes.
摘要:
Techniques for managing interference in a wireless network are described. A base station may receive enhanced pilot measurement reports from user equipments (UEs) and may make an interference management decision based on the received reports. The base station may select a serving base station for a UE based on an enhanced pilot measurement report received from the UE. The base station may determine resources with a low target interference level at a neighbor base station and may avoid scheduling a UE for uplink transmission on the resources. The base station may also determine whether to reserve resources for a neighbor base station based on data performance of the neighbor base station, whether the neighbor base station observes high interference from UEs served by the base station, or whether UEs served by the neighbor base station observe high interference from the base station, which may be determined based on the enhanced pilot measurement reports.
摘要:
Techniques for performing power control of multiple channels sent using multiple radio technologies are described. The transmit power of a reference channel, sent using a first radio technology (e.g., CDMA), is adjusted to achieve a target level of performance (e.g., a target erasure rate) for the reference channel. The transmit power of a data channel, sent using a second radio technology (e.g., OFDMA), is adjusted based on the transmit power of the reference channel. In one power control scheme, a reference power spectral density (PSD) level is determined based on the transmit power of the reference channel. A transmit PSD delta for the data channel is adjusted based on interference estimates. A transmit PSD of the data channel is determined based on the reference PSD level and the transmit PSD delta. The transmit power of the data channel is then set to achieve the transmit PSD for the data channel.
摘要:
Techniques for supporting data transmission on the uplink in a wireless network are described. In an aspect, a user equipment (UE) may send a data transmission to a serving base station and may send uplink control information (UCI) to a non-serving base station. The UCI may include pertinent information to allow the non-serving base station to process the data transmission from the UE. In one design, the UCI may allow the non-serving base station to estimate the interference due to the data transmission from the UE and to cancel the interference at the non-serving base station. The interference cancellation may improve the received signal quality at the non-serving base station. After the interference cancellation, the non-serving base station may process a data transmission from another UE served by the base station.
摘要:
Systems and methods of scheduling sub-carriers in an OFDMA system in which a scheduler takes into account channel conditions experienced by the communication devices to optimize channel conditions. The scheduler can partition a set of sub-carriers spanning an operating bandwidth into a plurality of segments. The segments can include a plurality of global segments that each includes a distinct non-contiguous subset of the sub-carriers spanning substantially the entire operating bandwidth. One or more of the global segments can be further partitioned into a plurality of local segments that each has a bandwidth that is less than a channel coherence bandwidth. The scheduler determines channel characteristics experienced by each communication device via reporting or channel estimation, and allocates one or more segments to communication links for each device according to the channel characteristics.
摘要:
Techniques for sending signaling messages in a wireless communication network are described. In an aspect, a signaling message (e.g., a reduce interference request) may be sent by mapping it to at least one specific subcarrier among a set of subcarriers reserved for sending the signaling message. The at least one subcarrier may be selected based on the message value. A signal may be sent on the at least one subcarrier in multiple symbol periods to convey the signaling message. In another aspect, a reduce interference request may be sent based on an orthogonal resource among orthogonal resources available for sending reduce interference requests. In one design, an orthogonal sequence may be selected based on the request and may be spread across a resource segment. In another design, the reduce interference request may be processed to obtain modulation symbols, and each modulation symbol may be spread across multiple subcarriers in one symbol period.
摘要:
Systems and methods that designate a control attachment point(s) during transmission of data in a Coordinated Multipoint (CoMP) system. The control attachment point is represented by an anchor cell to address control signaling and represent a User Equipment's (UE) interaction with the wireless communication system from a perspective of control (e.g., supplying/sending grants to the UE, transmitting/receiving ACKS on the downlink/uplink to the UE, control information (CQI), and the like.) The cells can further engage in backhaul transfer of information therebetween, and dynamic switching/change of anchor point based on criteria such as control loading, channel quality, and the like can further be implemented.
摘要:
Techniques for performing power control of multiple channels sent using multiple radio technologies are described. The transmit power of a reference channel, sent using a first radio technology (e.g., CDMA), is adjusted to achieve a target level of performance (e.g., a target erasure rate) for the reference channel. The transmit power of a data channel, sent using a second radio technology (e.g., OFDMA), is adjusted based on the transmit power of the reference channel. In one power control scheme, a reference power spectral density (PSD) level is determined based on the transmit power of the reference channel. A transmit PSD delta for the data channel is adjusted based on interference estimates. A transmit PSD of the data channel is determined based on the reference PSD level and the transmit PSD delta. The transmit power of the data channel is then set to achieve the transmit PSD for the data channel.
摘要:
Apparatus and methods for generation and use of reference signals in a wireless communications system are described. A group-specific reference signal pattern may be generated for provision to a group of UEs or terminals in communication with an eNodeB or base station. The reference signal may be generated based on system parameters. Reference signals may be generated to span multiple contiguous physical resource blocks.