摘要:
Ink includes water, an organic solvent, a surfactant including a silicon-based surfactant, and a resin including a polyester-based urethane resin having a polyolefin portion.
摘要:
A hydrogel structure includes a hollow tubular structure having an inner diameter of 1.0 mm or less, wherein the hydrogel structure has a transmission of 80 percent or more in a visible light range.
摘要:
An ink set that includes a first ink and a second ink each containing coloring agent, surfactant, organic solvent, resin, and water. The mix SP value of the organic solvent and the water of the first ink is larger than the mix SP value of the organic solvent and the water of the second ink. An ink-jet recording method using the ink set.
摘要:
A textile printing method that includes printing to a textile with a material including a dye expressed by the following general formula 1. In general formula 1, R1 to R16 is H, CH3, OH, NHC2H5, COOH, SO3H, SO3Na, NO2, or NH2.
摘要:
A vehicle receiver system includes: a receiver provided in a vehicle cabin, wherein an operating mode of the receiver includes a first mode for receiving a first wireless signal transmitted from a portable key, and a second mode for receiving a second wireless signal relating to a tire air pressure, transmitted from a transmitter provided on a tire; and a key verification device that performs key verification on the portable key in the vehicle cabin on the basis of the first wireless signal. In a predetermined situation, the receiver is configured such that the operating mode of the receiver is switched between the first mode and the second mode, and proportion of a second mode operation time in which the receiver operates in the second mode is set to be greater when a vehicle speed is relatively high than when the vehicle speed is relatively low.
摘要:
When a vehicle door locking operation is conducted, an in-vehicle device checks the vehicle compartment to determine whether a mobile unit exists in the vehicle compartment. When the in-vehicle device receives a response from the mobile unit indicating its presence in the compartment, the in-vehicle device receives a response from the mobile unit, prohibits the door from locking, and activates a buzzer. The mobile unit thus can be prevented from being locked in the vehicle compartment. When the mobile unit receives the search signal, it sounds its buzzer, thereby making it possible to further indicate its location within the compartment.
摘要:
A vehicular combined control system has functions of a smart entry system and a TPMS. A smart ECU turns on the output of a voltage signal terminal intermittently or in response to a given trigger. When the output of the voltage signal terminal turns on, a RF receiver section receives information from a portable device regardless of the ON/OFF state of an ignition switch to transmit the information to the smart ECU. When the ignition switch is ON and the output of the voltage signal terminal turns off, the RF receiver section receives information from tire sensors to transmit the information to a TPMS microcomputer.
摘要:
A vehicular combined control system has functions of a smart entry system and a TPMS. A smart ECU turns on the output of a voltage signal terminal intermittently or in response to a given trigger. When the output of the voltage signal terminal turns on, a RF receiver section receives information from a portable device regardless of the ON/OFF state of an ignition switch to transmit the information to the smart ECU. When the ignition switch is ON and the output of the voltage signal terminal turns off, the RF receiver section receives information from tire sensors to transmit the information to a TPMS microcomputer.
摘要:
Two standard waves from a standard waveform generation circuit are output via an output gate while being interchanged by a direction selector. The switching operation of the direction selector is controlled by a direction control signal M/I. 200 cycles of the standard waveforms are counted by a 200-cycle counter. A drive counter is downcounted every 200 cycles, while the drive counter is upcounted in accordance with the number of drive pulses DRIVE. When the count value of the drive counter becomes zero, output from the output gate is thereby stopped.
摘要:
An antenna holder for holding an antenna includes signal wiring and ground wiring being disposed on a single circuit board as either one of an external element and an internal element respectively with one end electrically coupled with a circuit on the single circuit board for serving as the external element in a spiral shape and the internal element inside of the external element at a predetermined distance. The antenna holder is provided with a spacer for keeping the predetermined distance between the external and the internal elements as well as an external tilt suppressor for suppressing a tilt of the external element from a direction being orthogonal to the circuit board.