Abstract:
We have demonstrated a novel Sagnac loop and micro-ring based laser cavity which is simple and reliable, with accurately controlled reflectivity and negligible excess loss. The resonant wavelength of a 2 μm radius micro-ring is shown to be lithographically controlled to a standard deviation of 3.6 nm. Both C- and O-Band lasers based on Sagnac loop mirror and micro-ring cavity have been demonstrated. The lasers are shown to be able to be modulated at 40 Gb/s.
Abstract:
A hybrid external cavity multi-wavelength laser using a QD RSOA and a silicon photonics chip is demonstrated. Four lasing modes at 2 nm spacing and less than 3 dB power non-uniformity were observed, with over 20 mW of total output power. Each lasing peak can be successfully modulated at 10 Gb/s. At 10−9 BER, the receiver power penalty is less than 2.6 dB compared to a conventional commercial laser. An expected application is the provision of a comb laser source for WDM transmission in optical interconnection systems.
Abstract:
A hybrid external cavity multi-wavelength laser using a QD RSOA and a silicon photonics chip is demonstrated. Four lasing modes at 2 nm spacing and less than 3 dB power non-uniformity were observed, with over 20 mW of total output power. Each lasing peak can be successfully modulated at 10 Gb/s. At 10−9 BER, the receiver power penalty is less than 2.6 dB compared to a conventional commercial laser. An expected application is the provision of a comb laser source for WDM transmission in optical interconnection systems.
Abstract:
A hybrid external cavity multi-wavelength laser using a QD RSOA and a silicon photonics chip is demonstrated. Four lasing modes at 2 nm spacing and less than 3 dB power non-uniformity were observed, with over 20 mW of total output power. Each lasing peak can be successfully modulated at 10 Gb/s. At 10−9 BER, the receiver power penalty is less than 2.6 dB compared to a conventional commercial laser. An expected application is the provision of a comb laser source for WDM transmission in optical interconnection systems.
Abstract:
An optical device that includes means for thermal stabilization and control is described. The optical device can be a ring resonator, or another device that requires accurate control of the phase of the optical signal. In an example involving an optical resonator, a thermal stabilization system includes a temperature sensor, a control circuit, and a heater local to the resonator. The temperature sensor can be a bandgap temperature sensor formed of a pair of matched p/n junctions biased in operation at different junction currents.
Abstract:
An optical device that includes means for thermal stabilization and control is described. The optical device can be a ring resonator, or another device that requires accurate control of the phase of the optical signal. In an example involving an optical resonator, a thermal stabilization system includes a temperature sensor, a control circuit, and a heater local to the resonator. The temperature sensor can be a bandgap temperature sensor formed of a pair of matched p/n junctions biased in operation at different junction currents.
Abstract:
A compact, low-loss and wavelength insensitive Y-junction for submicron silicon waveguides. The design was performed using FDTD and particle swarm optimization (PSO). The device was fabricated in a 248 nm CMOS line. Measured average insertion loss is 0.28±0.02 dB across an 8-inch wafer. The device footprint is less than 1.2 μm×2 μm, orders of magnitude smaller than MMI and directional couplers.
Abstract:
A hybrid external cavity multi-wavelength laser using a QD RSOA and a silicon photonics chip is demonstrated. Four lasing modes at 2 nm spacing and less than 3 dB power non-uniformity were observed, with over 20 mW of total output power. Each lasing peak can be successfully modulated at 10 Gb/s. At 10−9 BER, the receiver power penalty is less than 2.6 dB compared to a conventional commercial laser. An expected application is the provision of a comb laser source for WDM transmission in optical interconnection systems.
Abstract:
We have demonstrated a novel Sagnac loop and micro-ring based laser cavity which is simple and reliable, with accurately controlled reflectivity and negligible excess loss. The resonant wavelength of a 2 μm radius micro-ring is shown to be lithographically controlled to a standard deviation of 3.6 nm. Both C- and O-Band lasers based on Sagnac loop mirror and micro-ring cavity have been demonstrated. The lasers are shown to be able to be modulated at 40 Gb/s.
Abstract:
An optical device that includes means for thermal stabilization and control is described. The optical device can be a ring resonator, or another device that requires accurate control of the phase of the optical signal. In an example involving an optical resonator, a thermal stabilization system includes a temperature sensor, a control circuit, and a heater local to the resonator. The temperature sensor can be a bandgap temperature sensor formed of a pair of matched p/n junctions biased in operation at different junction currents.