摘要:
A BIOS refresh device includes a first socket, a second socket, and a jumper. The first socket includes a first elastic contact, a first voltage contact, and a first ground contact. The second socket includes a second elastic contact, a second voltage contact, and a second ground contact. The jumper includes a first pin, a second pin, a third pin, and a fourth pin. The first pin is electronically connected with the second elastic contact. The second pin is electronically connected with the first voltage contact or the second voltage contact. The third pin is electronically connected with the first elastic contact. The fourth pin is electronically connected with the second ground contact or the second ground contact.
摘要:
A motherboard assembly includes a motherboard and an expansion card. The motherboard includes an expansion slot, a hard disk drive (HDD) controller, a power connector, and a central processing unit (CPU). The expansion slot includes a protrusion, idle pins connected to the HDD controller, power pins connected to the power connector, signal pins connected to the CPU. The expansion card includes a circuit board. A storage unit, a display unit, and a power circuit connected to the storage unit and the display unit are all arranged on the circuit board. A notch is defined in a bottom side of the circuit board, to receive the protrusion. An edge connector is arranged on a bottom side of the circuit board and includes control signal pins connected to the storage unit, power pins connected to the power circuit, and bus signal pins connected to the display unit.
摘要:
A protecting circuit for a basic input output system (BIOS) chip of a computer includes a platform controller hub (PCH), an inverting circuit connected to the PCH, a BIOS socket to connect the BIOS chip, and a controlling circuit connected between the inverting circuit and the BIOS socket. The PCH outputs a first signal or a second signal, and a third signal. The inverting circuit outputs an inverted signal with a level contrary to the first or second signal. The controlling circuit receives the first or second signal and the inverted signal, to output a processing signal to the BIOS socket, thereby controlling write-protection states of the BIOS chip.
摘要:
A motherboard assembly includes a motherboard and an expansion card. The motherboard includes an expansion slot, a storage device interface, a power connector, and a central processing unit (CPU). The expansion slot includes a protrusion, first signal pins connected to the CPU, first power pins connected to the power connector. The expansion card includes a circuit board. A storage unit, a display unit, a power circuit, and a serial advanced technology attachment (SATA) connector connected to the storage unit and the storage device interface of the motherboard are all arranged on the circuit board. A notch is defined in a bottom edge of the circuit board, to receive the protrusion. An edge connector is arranged on a bottom edge of the circuit board and includes second power pins connected to the power circuit, and second signal pins connected to the display unit.
摘要:
A motherboard assembly includes a serial advanced technology attachment dual-in-line memory module (SATA DIMM) with a circuit board, a memory slot, and an interface. An edge connector is set on a bottom edge of the circuit board. A SATA connector is arranged on the circuit board, and connected to a control chip and the interface, enabling a motherboard communication with the SATA DIMM module.
摘要:
An electronic device with redundant fan control function includes a first fan, a first control module, a first power supply, a first switch unit, a second fan, a second control module, a second power supply, and a second switch unit. When the first power supply stops working, the second power supply powers the first fan and the second fan, and the first power supply sends a control signal to turn on the first switch unit to allow a group of control information output by the second control module to control the first fan. Therefore, the first fan and the second fan can work normally to dissipate heat from the electronic device.
摘要:
A test card includes a power interface, a controller, a test interface, and a test point. The test interface includes a power pin, a start pin, and a data signal pin. The power interface is connected to the controller and the power pin, and also connected to an external power to receive a work voltage. The controller transmits a turn-on signal to the start pin. The test point is connected to the data signal pin. When an interface of a motherboard is connected to the test interface, the power pin, the start pin, and the data signal pin are connected to corresponding pins of the interface of the motherboard. The motherboard outputs a data signal to the test point through the motherboard interface and the test interface after the controller receives the turn-on signal.
摘要:
A solid state disk assembly includes a solid state disk, a first heat conducting member and a second heat conducting member. The solid state disk includes a printed circuit board (PCB) and a chipset. The PCB includes a front surface, a rear surface, a first end, and a second end. The chipset is mounted on the front surface. The first heat conducting member abuts the chipset for absorbing heat generated by the solid state disk and includes at least a pair of elastic arms. The second heat conducting member attaches on the rear surface and includes at least a pair of engaging arms spatially corresponding to the at least one pair of elastic arms. The first end and the second end are clamped between the at least one pair of elastic arms. Each elastic arm engages with a respective one of the engaging arms.
摘要:
A motherboard includes a processor, a platform controller hub (PCH), a switch, a power connector, a switch unit, and an expansion slot. The PCH is connected to the expansion slot to output a bus signal to a serial advanced technology attachment dual in-line memory module (SATA DIMM), which is connected to the expansion slot, in response to the movement of a switch. The processor connected to the processor socket outputs a bus signal to an expansion card, which is connected to the expansion slot, in response to another movement of the switch.
摘要:
A protection circuit includes a switch circuit, a sample circuit, a comparison circuit, and a relay circuit. The switch circuit is connected between a hard disk power supply and a hard disk to control whether to output power from the hard disk power supply to the hard disk. The sample circuit samples the voltage being supplied to the hard disk, the comparison circuit receives the sampled voltage, compares the sampled voltage to a reference voltage, and controls the switch circuit to be turned on or off accordingly. The relay circuit is connected between a system power supply and an enable terminal of the comparison circuit. The relay circuit outputs a high level signal to turn on the switch circuit when the system power supply is being supplied and the hard disk power supply is not being supplied to the hard disk.