摘要:
In order to enable recording and reproduction from optical disks with defect management formatted with different group configurations without changing the firmware of the conventional apparatus and to allow the size of the spare area to be specified at initialization, the position information indicating the position of the defect management area is recorded in the control data area provided in the read-only area of the optical disk, and the information indicating the first address or size of the spare area is included in the defect management area.
摘要:
An optical disk physical has a recording region divided into zones, each zone including physical tracks adjacent to each other. An integer number of sectors are provided in each physical track. The angular recording density is higher in the more outward zones such that the linear recording density is substantially constant throughout the recording region, and logical tracks are formed of a predetermined number of sectors. independent of the physical tracks. The conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from a host device is easy. The addresses written in headers of the sectors in the logical track in which data are actually recorded, including substitute sectors used in place of defect sectors, are preferably consecutive to further facilitate the conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from the host device. Each of the zones can be set to serve as any of the different types of recording area, independently of other zones.
摘要:
An optical disk physical has a recording region divided into zones, each zone including physical tracks adjacent to each other. An integer number of sectors, are provided in each physical track. The angular recording density is higher in the more outward zones such that the linear recording density is substantially constant throughout the recording region, and logical tracks are formed of a predetermined number of sectors, independent of the physical tracks. The conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from a host device is easy. The addresses written in headers of the sectors in the logical track in which data are actually recorded, including substitute sectors used in place of defect sectors, are preferably consecutive to further facilitate the conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from the host device. Each of the zones can be set to serve as any of the different types of recording area, independently of other zones.
摘要:
An optical disk has two sides for recording data and at least one recording area for each side. Each recording area is associated with an attribute which designates whether the corresponding recording area is an area which permits rewriting or an area which does not permit rewriting. Data representing the attribute for the at least one recording area of each side is recorded in a structure management table provided in a predetermined part of the disk of each side. The two sides of the disk have different attributes.
摘要:
In optical disk having a track formed of groove tracks and land tracks connected every revolution to form a single spiral, each revolution-of the tracks is divided into sectors, each having identification signal region at the head of the sector, and the identification signal regions in tracks adjacent to each other are aligned in the radial direction. Prepits are formed in the identification signal region, on an extension of a boundary between groove and land tracks adjacent to each other. The prepits have a width substantially equal to the width of the grooves. The identification signal including address information of the sector. The polarity of tracking error signal is detected at the identification signal region of the recording sector, and whether the recording sector is in a groove track or land track is determined based on the polarity of tracking error signal. The identification signal may include information concerning the timing for switching tracking polarity in accordance with whether groove or land sector is being scanned.
摘要:
An optical disc using a single-spiral land and groove track format enabling accurate tracking offset correction and reliable detection of the transition point between a land track and a groove track, and a driving apparatus therefor. Four physical address areas PID1, PID2, PID3, and PID4 are recorded to a header area such that PID1 and PID2 are offset one-half track pitch toward the outside circumference of the disc from the groove track center, and PID3 and PID4 are offset one-half track pitch toward the inside circumference of the disc from the groove track center, and the physical address areas PID1-PID4 can be detected by means of a difference signal in the radial direction. The single frequency pattern area VFO at the beginning of each PID is lengthened by PID1 and PID3, thereby enabling tracking offset correction using a sum signal, and detection of the land-groove transition point using a difference signal obtained from the PID offset.
摘要:
An optical disk physical has a recording region divided into zones, each zone including physical tracks adjacent to each other. An integer number of sectors, are provided in each physical track. The angular recording density is higher in the more outward zones such that the linear recording density is substantially constant throughout the recording region, and logical tracks are formed of a predetermined number of sectors. independent of the physical tracks. The conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from a host device is easy. The addresses written in headers of the sectors in the logical track in which data are actually recorded, including substitute sectors used in place of defect sectors, are preferably consecutive to further facilitate the conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from the host device. Each of the zones can be set to serve as any of the different types of recording area, independently of other zones.
摘要:
An optical disk physical has a recording region divided into zones, each zone including physical tracks adjacent to each other. An integer number of sectors are provided in each physical track. The angular recording density is higher in the more outward zones such that the linear recording density is substantially constant throughout the recording region, and logical tracks are formed of a predetermined number of sectors, independent of the physical tracks. The conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from a host device is easy. The addresses written in headers of the sectors in the logical track in which data are actually recorded, including substitute sectors used in place of defect sectors, are preferably consecutive to further facilitate the conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from the host device. Each of the zones can be set to serve as any of the different types of recording area, independently of other zones.
摘要:
An optical disk physical has a recording region divided into zones, each zone including physical tracks adjacent to each other. An integer number of sectors are provided in each physical track. The angular recording density is higher in the more outward zones such that the linear recording density is substantially constant throughout the recording region, and logical tracks are formed of a predetermined number of sectors, independent of the physical tracks. The conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from a host device is easy. The addresses written in headers of the sectors in the logical track in which data are actually recorded, including substitute sectors used in place of defect sectors, are preferably consecutive to further facilitate the conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from the host device. Each of the zones can be set to serve as any of the different types of recording area independently of other zones.
摘要:
An optical disk physical has a recording region divided into zones, each zone including physical tracks adjacent to each other. An integer number of sectors are provided in each physical track. The angular recording density is higher in the more outward zones such that the linear recording density is substantially constant throughout the recording region, and logical tracks are formed of a predetermined number of sectors, independent of the physical tracks. The conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from a host device is easy. The addresses written in headers of the sectors in the logical track in which data are actually recorded, including substitute sectors used in place of defect sectors, are preferably consecutive to further facilitate the conversion between the logical track and sector addresses read from the disk and the linear logical addresses supplied from the host device. Each of the zones can be set to serve as any of the different types of recording area, independently of other zones.