摘要:
A unidirectional point-to-point communication apparatus for communicating messages between two computing resources irrespective of the phase of the messages, length of a communication path between the two computing resources and internal speed of the two computing resources. The communication apparatus has a high speed communication bus coupling a transmitter and a receiver for transmitting the messages from the transmitter to the receiver. A high speed communication clock is coupled to the bus and the receiver for timing the messages transmitted on the high speed communication bus between transmitter and the receiver. A large data buffer is coupled to the high speed communication bus after the receiver for storing messages transmitted between the transmitter and the receiver. A buffer accessing circuit is coupled to the buffer for referencing write locations to store the messages received from the transmitter over the communication bus, and for referencing read locations for reading the messages out of the buffer by the receiver. Finally, a delay locked loop circuit is coupled to the communication bus, the buffer accessing circuit and the buffer for providing the proper set-up and hold time requirements for the messages transmitted on the communication bus from the transmitter and storing the messages in the buffer.
摘要:
A bi-directional communication system includes a driver capable of controlling a slew rate of transmitted data signals. Impedance matching can be provided to match an impedance of a driver circuit to an impedance of a communication line. The impedance is maintained constant as data is driven from the data driver. The data receiver circuit can adjust a reference voltage in response to simultaneously transmitted data. The slew rate of the receiver circuit trip point is controlled to maintain adequate noise margin during operation. Both the receiver and driver circuits can be controlled using a delay line circuit.
摘要:
A bi-directional communication system includes a driver capable of controlling a slew rate of transmitted data signals. Impedance matching can be provided to match an impedance of a driver circuit to an impedance of a communication line. The impedance is maintained constant as data is driven from the data driver. The data receiver circuit can adjust a reference voltage in response to simultaneously transmitted data. The slew rate of the receiver circuit trip point is controlled to maintain adequate noise margin during operation. Both the receiver and driver circuits can be controlled using a delay line circuit.
摘要:
A device includes a bus, a first transmitter connected to the bus and configured to transmit a first signal over the bus in a first frequency band, a second transmitter connected to the bus and configured to transmit a second signal over the bus in a second frequency band at the same time that the first transmitter is transmitting the first signal, a first receiver connected to the bus and configured to receive the first signal transmitted over the bus in the first frequency band, and a second receiver connected to the bus and configured to receive the second signal transmitted over the bus in the second frequency band. The first frequency band and the second frequency band occupy different portions of the frequency spectrum.
摘要:
In an electronic system having first and second logic devices, a free running on-chip clock signal is generated by the first logic device, where the signal has a frequency that is controlled to match that of a global free-running clock signal received by both devices. The on-chip clock signal is synchronized to a strobe signal received by the first device and that was transmitted in association with a data signal by the second device. A logic function is repeatedly performed as synchronized by the first clock signal, to repeatedly generate one or more bits from the data signal.
摘要:
A frequency control unit has an input to receive a digital downstream strobe signal and an output to provide a controlled delay to the input strobe signal. A downstream latch has a data input to receive a digital downstream data signal and a clock input coupled to the output of the frequency control unit. The controlled delay is essentially equal to a set up time of the latch. A delay element coupled to the output of the frequency control unit further delays the downstream strobe signal by essentially a propagation time of the latch. Output drivers are coupled to the outputs of the latch and the delay element.
摘要:
A system and method for encoding and receiving data is provided. The data is encoded as a pulse amplitude modulated signal such that the amplitude signals do not transition from the highest signal level to the lowest signal level and do not transition from the lowest signal level to the highest signal level. The encoding and decoding is performed in some embodiments via a lookup table, and in further embodiments is designed to minimize the step between sequential pulse amplitude modulated symbols.
摘要:
The invention provides, in an embodiment, an apparatus, method and means for unintrusively observing, echoing and reading signals transmitted by one of a bus and wireless communication, without disturbing electrical properties of the bus, without adding bus latency, and without adding signal discontinuities. In an aspect, a buffer having a trigger is coupled with a component that connects to a memory bus, the buffer echoes signals to an observability port, and a diagnostic device reads the echoed signals. In an aspect, the bus is one of a simultaneous bi-directional (SBD) bus having ternary logic levels, a single ended bus, a differential bus, an optically coupled bus, a chipset bus, a frontside bus, an input/output (I/O) bus, a peripheral component interface (PCI) bus, and an industry standard architecture (ISA) bus. In an aspect, the buffer echoes bus signals having frequencies between 500 MHz. and 5 GHz. In an aspect, the buffer echoes bus signals having frequencies of at least 5 GHz.
摘要:
In some embodiments, the invention involves a circuit including a first set of conductors to carry a current bit set and last bit set circuitry to hold and provide a last bit set. The circuit also includes drivers coupled to interconnect conductors to provide signals from the drivers to the interconnect conductors and an encoder to receive the last bit set and the current bit set and determine whether to provide the current bit set or an encoded version of the current bit set to the drivers.
摘要:
The invention provides an apparatus, method and means for capturing data. In an aspect, a differential and complementary input folded-cascode clocked amplifier is provided. In an aspect, the invention provides rail-to-rail input common-mode voltage range. In an aspect, the invention provides a setup/hold time window that is smaller than the setup/hold time window of a conventional clocked amplifier and a conventional input amplifier with a separate amplifier and latch. In an aspect, the invention provides high common-mode rejection as compared with conventional clocked sense amplifiers.