摘要:
A small signal feedback loop or feed-forward loop having gain provides substantially unconditional instability in a phase locked loop when a reference phase signal is lost. The small signal feedback or feed-forward also modifies phase locked loop bandwidth when the reference phase signal is lost to increase rapidity of response to loss of reference phase signal while maintaining insensitivity to reference voltage amplitude change while the reference phase signal is present. The performance thus achieved is particularly suitable for rapid condition detection response and control of a grid connected power converter under islanding conditions.
摘要:
Providing a fast current sensor direct feedback path to a modulator for controlling switching of a switched power converter in addition to an integrating feedback path which monitors average current for control of a modulator provides fast dynamic response consistent with system stability and average current mode control. Feedback of output voltage for voltage regulation can be combined with current information in the integrating feedback path to limit bandwidth of the voltage feedback signal.
摘要:
A method for impedance measurement in a three-phase AC system is provided. The method includes injecting a shunt perturbation signal into the three-phase AC system and collecting a response to the shunt perturbation signal, and injecting a series perturbation signal into the three-phase AC system and collecting a response to the series perturbation signal. The response to the shunt perturbation signal and the response to the series perturbation signal are then transferred from abc coordinate to dq coordinates. At least one impedance of the three-phase AC system is calculated based on the response to the shunt perturbation signal and the response to the series perturbation signal.
摘要:
A method for impedance measurement using chirp signal injection is provided. The method includes injecting at least one chirp signal into the three-phase AC system, and collecting at least one response to the at least one chirp signal. The method further includes transferring the at least one response from abc coordinates to dq coordinates. At least one impedance is calculated based on the at least one response to the at least one chirp signal.
摘要:
A method for impedance measurement using chirp signal injection is provided. The method includes injecting at least one chirp signal into the three-phase AC system, and collecting at least one response to the at least one chirp signal. The method further includes transferring the at least one response from abc coordinates to dq coordinates. At least one impedance is calculated based on the at least one response to the at least one chirp signal.
摘要:
Providing a fast current sensor direct feedback path to a modulator for controlling switching of a switched power converter in addition to an integrating feedback path which monitors average current for control of a modulator provides fast dynamic response consistent with system stability and average current mode control. Feedback of output voltage for voltage regulation can be combined with current information in the integrating feedback path to limit bandwidth of the voltage feedback signal.
摘要:
A small signal feedback loop or feed-forward loop having gain provides substantially unconditional instability in a phase locked loop when a reference phase signal is lost. The small signal feedback or feed-forward also modifies phase locked loop bandwidth when the reference phase signal is lost to increase rapidity of response to loss of reference phase signal while maintaining insensitivity to reference voltage amplitude change while the reference phase signal is present. The performance thus achieved is particularly suitable for rapid condition detection response and control of a grid connected power converter under islanding conditions.
摘要:
Peak current, valley current or average current mode controlled power converters in either digital or analog implementations obtain a stabilized feedback loop and allow high system bandwidth design by use of an external ramp generator using a slope computation equation or design parameters based on fixing the quality factor of a double pole at one-half of the switching frequency at a desired value The slope of the external ramp waveform is tuned automatically with knowledge of the slope change in the waveform of inductor current of a power converter derived by differentiating a waveform in the current feedback loop. This autotuning of the external ramp generator provides immunity of quality factor change under variations of duty cycle, component values of topological change of the power converter.
摘要:
Peak current, valley current or average current mode controlled power converters in either digital or analog implementations obtain a stabilized feedback loop and allow high system bandwidth design by use of an external ramp generator using a slope computation equation or design parameters based on fixing the quality factor of a double pole at one-half of the switching frequency at a desired value The slope of the external ramp waveform is tuned automatically with knowledge of the slope change in the waveform of inductor current of a power converter derived by differentiating a waveform in the current feedback loop. This autotuning of the external ramp generator provides immunity of quality factor change under variations of duty cycle, component values of topological change of the power converter.
摘要:
Wobbling the operating frequency of a phase-locked loop (PLL), preferably by adding a periodic variation is feedback gain or delay in reference signal phase allows the avoidance of any non-detection zone that might occur due to exact synchronization of the phase locked loop operating frequency with a reference signal. If the change in PLL operating frequency is periodic, it can be made of adequate speed variation to accommodate and time requirement for islanding detection or the like when a reference signal being tracked by the PLL is lost. Such wobbling of the PLL operating frequency is preferably achieved by addition a periodic variable gain in a feedback loop and/or adding a periodically varying phase delay in a reference signal and/or PLL output.