摘要:
An optical disk apparatus capable of adjusting a focus servo and the like by precisely detecting a jitter amount. Light reflected from an optical disk is converted into an RF signal in an optical pickup and amplified by an RF amplifier before being supplied to an equalizer. The boost amount of the equalizer is set to zero during adjustment and set to a predetermined finite value (e.g., +20 dB) during normal recording and reproducing. By first setting the boost amount to zero, the delay characteristics of the RF signal from 3T to 11T are flattened such that an accurate jitter amount can be determined based on the integrated value of the phase differences of 3T to 11T, thereby allowing the optical pickup to be adjusted so as to minimize the jitter amount.
摘要:
An optical disk device which drives an HD-DVD or the like. When recording or reproducing data with respect to an optical disk of HD-DVD, the address information is demodulated by an address decoding circuit and is supplied to a system controller. The system controller performs error checking using the CRC technique. When a resulting CRC value does not correspond to CRC bits, the system controller regards a bit in which the number of waves in wobbles having the same phase is not four, which is a predetermined value, as an error bit, and performs bit data replacement with respect to the error bit. Specifically, the system controller searches for a combination of bit values by which a resulting CRC value matches the CRC bits, thereby performing error correction. At this time, the system controller tries the data value replacement preferentially using a combination of bit values by which the address is advanced by one address from the immediately previous address which is fixed among all the possible combinations with respect to the error bits.
摘要:
In an optical disk of HD-DVD, data is recorded in both grooves and lands. A groove track includes its own data region called a groove (G) track address system formed therein and a land track includes its own data region called a land (L) track address system formed therein. One bit of address data is composed of four redundant wobble waves. When only three or two of the four wobble waves can be detected, an error is determined. When an error is determined in tracing of a groove track, bit data of the L track address system is used to correct the error. When an error is determined in tracing of a land track, bit data of the G track address system is used to correct the error.
摘要:
An optical disk apparatus for suppressing a DSV and performing R-OPC. An encoding/decoding circuit inserts a synchronization information item to a head of a synchronous frame once when data are recorded on an optical disk. First, the encoding/decoding circuit inserts synchronization information as a mark or a space on the basis of a DSV. When the polarity of the first synchronization information item is a mark, the polarity of a next synchronization information item is also set on the basis of the DSV. When the polarity of the first synchronization information is a space, the polarity of the next synchronization information is set to a mark. R-OPC is performed at a timing when the polarity of the synchronization information is a mark.
摘要:
In a surface acoustic wave element according to an embodiment of this invention, raised electrodes 20 formed on thin film electrodes 18 are provided with throughholes 31. Additionally, bumps 26 arranged on the raised electrodes 20 reach the thin film electrode 18 by going through an oxide film 18a of the thin film electrodes 18 after part of the bumps enters the throughholes 31 of the raised electrodes 20. By doing this, conduction is achieved between the thin film electrodes 18 and the bumps 26 formed on a piezoelectric monocrystal substrate 28. Thus, a solid oxide film 18a is formed on the surface of the thin film electrodes 18 formed from monocrystal aluminum, but part of the bumps 26 which enters the throughholes 31 of the raised electrodes 20 goes through this oxide film 18a, so conduction between the thin film electrode 18 and the bump 26 is achieved with higher accuracy.
摘要:
A tilt detection system includes an optical disk having a series of data recorded therein, the series of data having a pulse width smaller than the minimum pulse width of data recorded in an ordinary optical disk; a reproducing part reproducing a signal from the optical disk by emitting a light beam onto the optical disk; and a tilt detecting part detecting a tilt of the light beam with respect to the optical disk based on a reproduced RF signal provided by the reproducing-part when the series of data having the smaller pulse width is reproduced.
摘要:
An apparatus for use with a recordable compact disk having an optically discernible pregroove formed thereon to provide a multiturn spiral track along which data pits are to be formed. Each pregroove turn is partly wobbled to represent addresses. Since wobble detection is easy to be impeded by track eccentricity with respect to the axis of disk rotation, a pair of compensator circuits are connected one to each output of a composite photodetector for eliminating from the photodetector output signal a frequency component due to track eccentricity. Each compensator circuit comprises a variable gain amplifier circuit, and a feedback loop for varying the amplifier gain in inverse proportion to the amplitude of the frequency component due to track eccentricity.
摘要:
An optical disk reproducing apparatus uses a spindle motor having a low torque to reduced power consumption and manufacturing cost while maintaining a low error rate for reproduced data. The spindle motor is rotated at a constant rotational speed under a CAV control when a pick-up is moved. The rotational speed of the spindle motor is switched to a reference linear speed under a CLV control when a reproducing operation is performed. The reference linear speed is established for each of the zones of a recording area of an optical disk. The reference linear speed is determined by generating a zone clock set for each of the zones. A frequency error signal is generated by comparing the zone clock with the reproduction data so as to maintain the spindle motor at the reference linear speed determined by the zone clock.
摘要:
A disk apparatus comprising a controller receiving commands from a command input device and controlling an entire operation of the disk apparatus. The rotating control function is coupled to the controller for controlling the first motor. The pickupmotor control function is coupled to the controller for controlling the second motor. The pickup control function is coupled to the controller for controlling a focusing operation and a tracking operation of the pickup. And the signal processing function is coupled to the controller for processing a recording signal to be recorded on the disk-shaped recording medium and a reproduced signal read out therefrom. The controller is comprised function-stop function for determining whether or not any command is received from the command input device during a predetermined period of time in a state. The disk apparatus is maintained in a predetermined mode and for stopping predetermined function among the rotating control function, the pickup motor control function, the pickup control function, and the signal processing function when it is determined that no command is received from the command input device during the predetermined period.
摘要:
This digital data reproducing apparatus is adapted to prevent reproduction errors of data, wherein a read gate opened when a fixed pattern in a header field for phase locking is detected is kept opened until the data reproduction in a data field is completed, whereby the phase locking in the data field is performed still in the same low-speed mode as when the PLL pull-in is completed in the header field, with the responding ability lowered to defects such as voids or the like in the phase locking pattern area in the data field.This digital data reproducing apparatus is adapted to prevent reproduction errors, wherein, when a reproduced data in a data field is locked, a read gate is opened after a fixed pattern recorded for phase locking is surely detected, so that the phase locking is started in a high-speed mode, while avoiding erroneous operations of the PLL.