摘要:
An inspection apparatus includes a discrimination function determination unit which determines whether or not a discrimination function forms an area including a discrimination sample. The discrimination function is used in non-parametric one-class discrimination. The discrimination sample is discriminated into a class as a single area in an input space where learning samples are plotted.
摘要:
Means for stably supplying a lithium-containing complex oxide exhibiting a high performance as a cathode active material of a lithium secondary cell or the like and having a high tap density. Granular lithium-containing complex oxide such as lithium manganese complex oxide comprises “complex oxide grains produced by integrating lithium-rich material grains abnormally grown during a firing reaction with the surfaces of the base grains by sintering.” The number of complex oxide grains is not more than 50 per gram of the complex grains. Metal oxide such as manganese oxide and lithium carbonate not more than 5 μm in average grain size are mixed by means of a mixer which grinds and mixes particles by using shearing force and heating and firing them at a warming rate of not more than 50° C./h., thus producing the lithium-containing complex oxide.
摘要:
Suitability of determination standard value for intermediate inspection is determined. A correlation between measured values X for intermediate inspection and measured values Y for final inspection is derived. For each of calculation target points on X-axis, a distribution pattern of measured values Y is specified for measured value Xn of the point based on the correlation, and probabilities of a range determined to be non-defective by determination standard value of final inspection and a range determined to be defective that are included in the distribution are calculated. For each of the ranges of measured values X determined to be non-defective and defective based on the determination standard value of the intermediate inspection, a degree of consistency and a degree of inconsistency between results of inspections are determined using the probabilities. Suitability of the determination standard value is determined based on the two degrees.
摘要:
An information processing device stores an extracted feature of each inspection item of the process inspection, and a determination result of a final inspection in a memory device, calculates a separation degree between a distribution of features of products which were determined as good products at the final inspection and a distribution of features of products which were determined as defective products at the final inspection for every inspection item or every combination of inspection items based on data of the products stored in the memory device, selects an inspection item whose inspection standard is to be reset from the inspection items or the combinations of the inspection items based on a value of the separation degree. Thus providing a method of appropriately setting an inspection standard for detecting a defect sign during process inspection. Further a process inspection device and inspection standard setting device which implements the same.
摘要:
An inspection method and an inspection apparatus are disclosed, wherein the appropriate inspection can be conducted in accordance with the situation change of a nonconforming product from an initial stage, an adjust stage and a stable stage. The conformity/nonconformity is discriminated according to a MTS model and a one class SVM model based on the normal data obtained from a conforming product. The conformity/nonconformity is discriminated by both the MTS and the one class SVM in an adjust stage where a sufficient amount of sample data cannot be acquired or the shape of the conforming product distribution in the feature space and the shape of the normal area are unstable, and only by the MTS in a stable stage where a sufficient amount of sample data can be acquired and the shape of the conforming product distribution and the shape of the normal area are stable.
摘要:
A Zn--Ni alloy having a high Ni content is used for supplying Ni.sup.2+ and Zn.sup.2+ ions into an acidic plating bath and for supplying Ni and Zn into a hot dip galvanizing bath. This alloy is characterized by being produced by using a flux consisting of a fused-salt former, which forms a salt having a melting temperature of 700.degree. C. or less, and Na.sub.2 B.sub.4 O.sub.7 and occasionaly additionally Na.sub.2 CO.sub.3. By using the inventive alloy, the bath can be quickly prepared, and Zn and Ni can be supplied to the bath without leaving the undissolved residue.
摘要翻译:使用具有高Ni含量的Zn-Ni合金将Ni2 +和Zn2 +离子供应到酸性电镀浴中,并将Ni和Zn供应到热浸镀锌浴中。 该合金的特征在于使用由熔融盐形成剂形成的助熔剂,其形成熔融温度为700℃以下的盐和Na 2 B 4 O 7,另外还含有Na 2 CO 3。 通过使用本发明的合金,可以快速制备浴,并且可以将Zn和Ni供应到浴中而不留下未溶解的残余物。
摘要:
A Zn-Ni alloy having a high Ni content is used for supplying Ni.sup.2+ and Zn.sup.2+ ions into an acidic plating bath and for supplying Ni and Zn into a hot dip galvanizing bath. This alloy is characterized by being produced by using a flux consisting of a fused-salt former, which forms a salt having a melting temperature of 700.degree. C. or less, and Na.sub.2 B.sub.4 O.sub.7 and occasionaly additionally Na.sub.2 CO.sub.3. By using the inventive alloy, the bath can be quickly prepared, and Zn and Ni can be supplied to the bath without leaving the undissolved residue.
摘要翻译:使用具有高Ni含量的Zn-Ni合金将Ni2 +和Zn2 +离子供应到酸性电镀浴中,并将Ni和Zn供应到热浸镀锌浴中。 该合金的特征在于使用由熔融盐形成剂形成的助熔剂,其形成熔融温度为700℃以下的盐和Na 2 B 4 O 7,另外还含有Na 2 CO 3。 通过使用本发明的合金,可以快速制备浴,并且可以将Zn和Ni供应到浴中而不留下未溶解的残余物。
摘要:
Zinc powder, which contains a coloring element, e.g., Ti, Mn, or V, is heated to a temperature of from 350.degree. to 700.degree. C. so as to oxidize the surface of the powder and hence to develop such colors as brown, navy blue, blue, greenish-brown, green, and coffee brown. The colored zinc powder is sprayed onto a steel, aluminum, or ceramic article to produce a colored article. The colored zinc powder is also used as a pigment.
摘要:
An inspection apparatus includes a discrimination function determination unit which determines whether or not a discrimination function forms an area including a discrimination sample. The discrimination function is used in non-parametric one-class discrimination. The discrimination sample is discriminated into a class as a single area in an input space where learning samples are plotted.
摘要:
A lithium-containing complex oxide exhibits a high performance as a cathode active material of a lithium secondary cell or the like and having a high tap density. A granular lithium-containing complex oxide, such as lithium manganese complex oxide, is made up of “complex oxide grains produced by integrating lithium-rich material grains abnormally grown during a firing reaction with the surfaces of the base grains by sintering.” The number of complex oxide grains is not more than 50 per gram of the complex grains. A metal oxide such as manganese oxide and lithium carbonate not more than 5 μm in average grain size are mixed by means of a mixer which grinds and mixes particles by using a shearing force and heated and fired at a warming rate of not more than 50° C./h., thus producing the lithium-containing complex oxide.