摘要:
A mobile communication system using an enhanced uplink dedicated transport channel transmits data at a relatively low effective data rate through non-scheduled transmission. Data transmission time intervals for user equipments (UEs) have different values in the non-scheduled transmission and therefore uplink interference is reduced. An non-scheduled transmission period N and the number of non-scheduled transmissions k are determined such that each UE performs the non-scheduled transmission. A Node B and each UE are notified of possible non-scheduled transmission time intervals based on the determined non-scheduled transmission period N and the determined number of non-scheduled transmissions k through signaling. The UE transmits the uplink data without the Node B's scheduling at the possible non-scheduled transmission time intervals.
摘要:
A method and apparatus are provided for transmitting a Session Initiation Protocol (SIP) message by a User Equipment (UE) in an idle mode in an Internet Protocol Multimedia Subsystem (IMS) system. The UE transmits one combined message of an AS control message and a NAS control message including information indicating transmission of an SIP message, thereby having an effect on an upper node to reduce a delay due to message processing.
摘要:
A method for creating and assigning TMGI, comprising steps of: sending a message to a SGSN when an UE joining a MBMS service group; if a MBMS TMGI has been added to SGSN records, the SGSN directly replying to the UE with the TMGI corresponding to a service; if there is no record for this service in the SGSN, the SGSN sending a message to the GGSN, and if the TMGI corresponding to this service is created by the GGSN, the GGSN sending it to the SGSN; if there is no record in the GGSN and a TMGI is created by the GGSN, the GGSN creates a TMGI for the MBMS service; e. the SGSN sending the TMGI received from the GGSN to the RNC. f. The UE receiving signal from the RNC by using the TMGI.
摘要:
Disclosed is a method and an apparatus for transmitting and receiving additional information through a random access procedure by mapping at least one additional information element to random access codes to be used in a random access procedure between a UE and an ENB in a mobile communication system. According to the method, a random access code selected based on additional information to be transmitted and a triggering cause of the random access procedure is transmitted from the UE to the ENB. Each random access code is differently mapped to at least one additional information element according to a class of a cause for which a corresponding random access procedure is triggered, and the additional information elements are mapped to different ranges of random access codes according to the classes of the cause.
摘要:
A method and apparatus for controlling reliability of a feedback signal in a mobile communication system supporting HARQ are provided. A transmitter determines reliability indication information indicating a required reliability for a feedback signal for a user data packet to be transmitted, and sends the user data packet and the reliability indication information in per packet control information associated with the user data packet. A receiver receives the user data packet and the per packet control information, decodes the user data packet according to the per packet control information, performs an error verification on the decoded user data packet that comprises errors, and transmits the feedback signal with a reliability determined, based on the reliability indication information according to the result of the error verification.
摘要:
A method and apparatus performs handover from an OFDM-based E-UMTS system to a CDMA-based UMTS system. A UE in communication with a PDN via the E-UMTS system, measures signal strength of the UMTS system, and sends a measurement report message indicating the measured signal strength to the E-UMTS system. A radio access network (E-RAN) of the E-UMTS system, determines whether to perform handover from the E-UMTS system to the UMTS system based on the measured signal strength. If the handover is to be performed, a core network (E-CN) of the E-UMTS system generates a PDP context and an MM context for the UE in response to a handover request from the E-RAN. The E-CN sets up a data tunnel for the UE to a GGSN of the UMTS system using the PDP/MM context. After setting up the data tunnel, the E-CN sends to the UE a handover command message including information on a radio bearer (RB) to be used by the UE to access the UMTS system. The UE accesses the UMTS system using the RB information. After accessing the UMTS system, the UE forwards user data for the UE via a data transmission path composed of the E-CN, the data tunnel, a SGSN, and a RAN of the UMTS system, between the PDN and the UE.
摘要:
A method for efficiently utilizing radio resources by reducing a size of a PDU of an RLC layer in a mobile communication system supporting a VoIP service. In the method, an RLC PDU is framed without inserting information regarding a start point and an end point of a voice packet, or existence or absence of padding, such that a size of overhead according to transmission of the voice packet can be reduced. Consequently, restricted radio resources can be efficiently used.
摘要:
Disclosed are an apparatus and method for providing packet data service from a radio network controller (RNC) to user equipment (UE) in a mobile communication system. A radio bearer (RB) of a predetermined channel type is configured to compress and de-compress headers of packets passed between the RNC and the UE. The packet data service is provided from the RNC to the UE via the RB. When the channel type is changed, configuration information associated with an RB of the changed channel type is determined. Header compression (HC) context used in the RB of a previous channel type is acquired according to the configuration information and the RB of the changed channel type including the acquired HC context is configured. The packet data service is continuously provided via the RB of the changed channel type. Therefore, the invention reduces waste of radio resources that is due to a channel type change and delay that is due to system reset.
摘要:
A method and apparatus for transmitting and receiving CQI in a wireless communication system are provided, in which when a UE transitions from a continuous reception state to a DRX state, CQI report resources are reallocated to the UE according to a CQI report resource reallocation rule agreed between the UE and an E-RAN, which obviates the need for signaling information about allocated new CQI report resources.
摘要:
A method is provided for transmitting an uplink scheduling request in a mobile communication system. A terminal compares a lowest priority for permitting transmission of the scheduling request notified from a radio resource controlling node with a highest priority among service priorities corresponding to generated data or control signals, if data or control signals to be transmitted in the uplink are generated from an upper layer. The terminal transmits the scheduling request to the radio resource controlling node to thereby request the radio resource controlling node to allocate radio resources for transmitting the data or control signals, when the highest priority is greater than or equal to the lowest priority.