摘要:
A puller/connector (9) for electrical raceways (1) having a spiral shape that is predeterminedly sized so as to lock onto the troughs (3) located on the external surface of an electrical raceway (24) or into the crests (2) located on the internal surface of an electrical raceway (25). Located on a first end of the puller/connector (28) is preferably a barb (10) that is utilized for locking the puller/connector (9) onto/into the electrical raceway (1). Additional embodiments of the puller/connector (9) include a knockout sizing converter (12) and a hooked end for grounding purposes, a puller/connector (9) having a threaded attachment (16) and a puller/connector (9) having a cover (18).
摘要:
A method for predicting vehicle operator destinations including receiving vehicle position data for a vehicle. The vehicle position data for a current trip is compared to vehicle position data for a previous trip to predict a destination for the vehicle. A path to the destination is suggested.
摘要:
Microparticles of a water-soluble material, which are smooth and spherical, and at least 90% of which have a mass median particle size of 1 to 10 .mu.m, and which carry a therapeutic or diagnostic agent can successfully be used in dry powder inhalers to deliver the said agent.
摘要:
A no-process printing plate forming photosensitive article having a protective top coat layer is described. The top coat layer may be a water soluble or dispersible polymer, sol, salt, or mixture thereof. The protective top coat layer may provide the no-process printing plate with protection from contamination during handling, improved suppression of odors during imaging, and improved roll-up performance on press. The hydrophilic protective top coat is removed on press by action of the fountain solution and/or ink.
摘要:
A circuit interrupter samples waveforms in a protected circuit by taking samples in pairs spaced 90 electrical degrees apart. The sum of the squares of samples in each pair, which is representative of the RMS value of the fundamental frequency of the waveform, is used for instantaneous protection by comparing a running sum of the squares for the two most recent pairs of samples to a threshold representative of the instantaneous trip pick-up value. This sum of the squares of successive two pairs of samples is also used for short delay protection. A delay between successive pairs of samples is varied to produce a selected equivalent sampling rate after a given number of samples. Samples accumulated at this equivalent sampling rate, which is sixty-four samples per cycle in the preferred embodiment, are used for long delay protection and metering.
摘要:
A circuit breaker with a digital trip unit has a protection mode and a waveform capture mode of operation. In the protection mode, an equivalent sampling technique based upon pairs of samples spaced 90 electrical degrees apart with a pattern of delays between pairs is used to digitize the waveforms in the protected electrical system. Synchronous sampling is used in the waveform capture mode. The value of each sample is monitored in the waveform capture mode and a transfer is made back to the protection mode if a threshold value indicating an overcurrent condition is exceeded. The percentage total harmonic distortion, and per harmonic distortion for harmonics, up to and including the 27th are sequentially presented on a display on the front panel of the circuit breaker and can be transmitted along with the raw waveform data to a remote processor.
摘要:
A circuit interrupter with a digital trip unit automatically sets the sampling interval appropriate for the 50 Hz or 60 Hz distribution system to which the interrupter is connected. In order to avoid falsely shifting the interval in response to distorted currents, the trip unit only changes the interval if the number of zero crossings of the current within a fixed number of samples is within two zero crossings of the number of zero crossings for an undistorted current of the other frequency for two consecutive time periods in which the fixed number of samples are taken. Furthermore, changes in the interval are only written into an EEPROM for use on power-up a fixed number of times to preclude disabling the EEPROM. In one embodiment, a 2 pole filter is utilized in the zero crossing counting circuit to eliminate false counts from noise originating in a chopper used in the trip unit power supply. In another embodiment, the zero crossing counting circuit is disabled unless external dc power is available for the trip unit which idles the chopper.
摘要:
A no-process printing plate forming photosensitive article having a protective top coat layer is described. The top coat layer may be a water soluble or dispersible polymer, sol, salt, or mixture thereof. The protective top coat layer may provide the no-process printing plate with protection from contamination during handling, improved suppression of odors during imaging, and improved roll-up performance on press. The hydrophilic protective top coat is removed on press by action of the fountain solution and/or ink.
摘要:
A method of operating a transport refrigeration system having a compressor driven by a prime mover at a selected one of high and low speeds, an evaporator, and an evaporator blower driven by the prime mover. Refrigeration control provides an error value which controls the temperature of a load space to a predetermined set point via heating and cooling modes. The method includes the steps of driving the compressor at high speed during pull down, and injecting hot gas into the evaporator when the error is reduced to a predetermined value. The prime mover is maintained at high speed, to keep evaporator air flow at a high rate, continuing a relatively rapid temperature pull-down across the entire load space. The speed of the prime mover is reduced to low speed when the error is further reduced to a second value, which also initiates suction line modulation while maintaining hot gas injection.
摘要:
A digital control for a multiaxis robot includes position, velocity and torque controls that drive a motor voltage control loop. Pulse width modulated control signals operate power switches in a power bridge to control the current to each robot joint motor. A single resistor is connected in the bridge circuit to supply motor current feedback needed for control loop operation.