摘要:
Amplifying magnitude metric of received signals during iterative decoding of LDPC code and LDPC coded modulation. By appropriately selecting a metric coefficient value that is used to calculate the initial conditions when decoding LDPC coded signals, a significant reduction in BER may be achieved at certain SNRs. The appropriate selection of the metric coefficient value may be performed depending on the particular SNR at which a communication system is operating. By adjusting this metric coefficient value according to the given LDPC code, modulation, and noise variance, the overall performance of the decoding may be significantly improved. The convergence speed is slowed down so that the decoder will not go to the wrong codeword, and the moving range of the outputs of the decoder is restricted so that the output will not oscillate too much and will eventually move to the correct codeword.
摘要:
A short length LDPC (Low Density Parity Check) code and modulation adapted for high speed Ethernet applications. In some instances, the short length LDPC code and modulation may be employed within the recommended practices currently being developed by the IEEE 802.3an (10GBASE-T) Task Force. The IEEE 802.3an (10GBASE-T) Task Force has been commissioned to develop and standardize communications protocol adapted particularly for Ethernet operation over 4 wire twisted pair cables. A new LDPC code, some possible embodiments of constellations and the corresponding mappings, as well as possible embodiments of various parity check matrices, H, of the LDPC code are presented herein to provide for better overall performance than other proposed LDPC codes existent in the art of high speed Ethernet applications. Moreover, this proposed LDPC code may be decoded using a communication device having much less complexity than required to decode other proposed LDPC codes existent in this technology space.
摘要:
LDPC (Low Density Parity Check) coded 128 DSQ (Double Square QAM) constellation modulation and its associated labeling. A novel means is introduced by which a constellation may be arranged and mapping in its symbols may be determined to provide for improved performance. One application area in which this may be employed is transmission over twisted pair (typically copper) cabling existent within data centers of various networks. The operation of the IEEE 802.3 Ethernet local area networks currently being used (as well as those currently under development) would benefit greatly by employing the various principles presented herein. When this novel approach of an LDPC coded 128 DSQ constellation modulation combined with TH (Tomlinson-Harashima) preceding is employed within a communication device at a transmitter end of a communication channel (i.e., in a transmitter and/or a transceiver), the overall operation of a communication system may improve significantly when compared to prior techniques.
摘要:
Decoding error correcting codes transmitted through multiple wire twisted pair cables with uneven noise on the wires. A novel approach is presented by which the metrics may be calculated for signals received over multi-wire (or alternatively referred to as multi-channel, and/or multi-path) communication channels to exploit an uneven distribution of noise among those wires for improved performance. In addition, this approach may also be performed in combination with employing an amplification factor to modify the metrics employed when performing ECC (Error Correcting Code) decoding. Moreover, when information is known concerning which 1 or more paths (e.g., wires) has an SNR that is different (e.g., lower in some cases) from the others, an even better adapted means of calculating the metrics associated with each of the paths (e.g., wires) may be employed to provide for improved performance with respect to iterative decoding processing of signals encoded using ECCs.
摘要:
Construction of LDPC (Low Density Parity Check) codes using GRS (Generalized Reed-Solomon) code. A novel approach is presented by which a GRS code may be employed to generate a wide variety of types of LDPC codes. Such GRS based LDPC codes may be employed within various types of transceiver devices implemented within communication systems. This approach may be employed to generate GRS based LDPC codes particular designed for various application arenas. As one example, such a GRS based LDPC code may be specifically designed for use in communication systems that operate in accordance with any standards and/or recommended practices of the IEEE P802.3an (10GBASE-T) Task Force.
摘要:
Rate control adaptable communications. A common trellis is employed at both ends of a communication system (in an encoder and decoder) to code and decode data at different rates. The encoding employs a single encoder whose output bits may be selectively punctured to support multiple modulations (constellations and mappings) according to a rate control sequence. A single decoder is operable to decode each of the various rates at which the data is encoded by the encoder. The rate control sequence may include a number of rate controls arranged in a period that is repeated during encoding and decoding. Either one or both of the encoder and decoder may adaptively select a new rate control sequence based on a variety of operational parameters including operating conditions of the communication system, a change in signal to noise ratio (SNR), etc.
摘要:
LDPC (Low Density Parity Check) code size adjustment by shortening and puncturing. A variety of LDPC coded signals may be generated from an initial LDPC code using selected shortening and puncturing. Using LDPC code size adjustment approach, a single communication device whose hardware design is capable of processing the original LDPC code is also capable to process the various other LDPC codes constructed from the original LDPC code after undergoing appropriate shortening and puncturing. This provides significant design simplification and reduction in complexity because the same hardware can be implemented to accommodate the various LDPC codes generated from the original LDPC code. Therefore, a multi-LDPC code capable communication device can be implemented that is capable to process several of the generated LDPC codes. This approach allows for great flexibility in the LDPC code design, in that, the original code rate can be maintained after performing the shortening and puncturing.
摘要:
LDPC (Low Density Parity Check) codes with corresponding parity check matrices selectively constructed with CSI (Cyclic Shifted Identity) and null sub-matrices. An LDPC matrix corresponding to an LDPC code is employed within a communication device to encode and/or decode coded signals for use in any of a number of communication systems. The LDPC matrix is composed of a number of sub-matrices and may be partitioned into a left hand side matrix and a right hand side matrix. The right hand side matrix may include two sub-matrix diagonals therein that are composed entirely of CSI (Cyclic Shifted Identity) sub-matrices; one of these two sub-matrix diagonals is located on the center sub-matrix diagonal and the other is located just to the left thereof. All other sub-matrices of the right hand side matrix may be null sub-matrices (i.e., all elements therein are values of zero “0”).
摘要:
Variable modulation within combined LDPC (Low Density Parity Check) coding and modulation coding systems. Variable modulation encoding of LDPC coded symbols is presented. In addition, LDPC encoding, that generates an LDPC variable code rate signal, may also be performed as well. The encoding can generate an LDPC variable code rate and/or modulation signal whose code rate and/or modulation may vary as frequently as on a symbol by symbol basis. Some embodiments employ a common constellation shape for all of the symbols of the signal sequence, yet individual symbols may be mapped according different mappings of the commonly shaped constellation; such an embodiment may be viewed as generating a LDPC variable mapped signal. In general, any one or more of the code rate, constellation shape, or mapping of the individual symbols of a signal sequence may vary as frequently as on a symbol by symbol basis.
摘要:
Variable modulation with LDPC (Low Density Parity Check) coding provides for generation of LDPC coded symbols having different respective code rates and/or modulations. In addition, appropriate LDPC encoding, that generates an LDPC variable code rate signal, may also be performed as well. The encoding can generate an LDPC variable code rate and/or modulation signal whose code rate and/or modulation may vary as frequently as on a symbol by symbol basis. Some embodiments employ a common constellation shape for all of the symbols of the signal sequence, yet individual symbols may be mapped according different mappings of the commonly shaped constellation; such an embodiment may be viewed as generating a LDPC variable mapped signal. In general, any one or more of the code rate, constellation shape, and/or mapping of the individual symbols of a signal sequence may vary as frequently as on a symbol by symbol basis.