摘要:
A thermally stable microporous breathable film is provided comprising at least 35% filler, by weight of the filled-film, and a thermoplastic polymer blend of a first polyethylene polymer and a second polyethylene polymer. The first polyethylene polymer comprises 30%-70% by weight of the polymer blend and can have a density between about 0.86 g/cm3 and 0.89 g/cm3 and the second polyethylene polymer can have a density between about 0.90 g/cm3 and 0.92 g/cm3. The filled-film can be uniaxially or biaxially oriented to form a microporous film and/or film laminate having good body conformance and which retains a high WVTR at 37° C. and above.
摘要翻译:提供了一种热稳定的微孔透气膜,其包含至少35重量%的填充膜填料,以及第一聚乙烯聚合物和第二聚乙烯聚合物的热塑性聚合物共混物。 第一聚乙烯聚合物包含30重量%-70重量%的聚合物共混物,并且可以具有约0.86g / cm 3至0.89g / cm 3的密度和 第二聚乙烯聚合物的密度可以在约0.90g / cm 3和0.92g / cm 3之间。 填充膜可以单轴或双轴取向以形成具有良好的身体一致性并且在37℃及以上保持高WVTR的微孔膜和/或膜层压体。
摘要:
An elastomeric, breathable laminate having enhanced breathability is formed by bonding a breathable, microporous, extendible/elastic film to a nonwoven facing material. The facing material can be necked to impart cross-directional stretchability. Once the film and the facing material are bonded together, the resulting laminate is stretched in one or more areas to impart higher breathability to selected areas of the laminate. The breathable laminate with enhanced breathability is particularly useful as an outer cover for diapers and other personal care products.
摘要:
A composite elastic material is provided having improved hysteresis comprising a layer of an elastic material bonded to a layer of nonelastic material at least one side. The elastic material layer is made from a blend of a narrow polydispersity number polymer and a conventional elastomer, and the blend is essentially free of low molecular weight polyethylene processing aids. The composite elastic material laminate should have a hysteresis at least 15 percent better than a similar laminate made without the narrow polydispersity number elastomer but with the processing aid.
摘要:
An elastic liquid impermeable laminate is disclosed having an extensible barrier film; an 8 g/m.sup.2 to 100 g/m.sup.2 elastomeric nonwoven web comprising fibers of low density polyethylene having a density less than 0.89 g/cm.sup.3 ; and an extensible cloth-like outer layer, such as a nonwoven web of spunbonded fibers. The barrier laminate can be laminated by thermal point bonding to create patterns having improved loft, excellent hand and while achieving peel strengths in excess of 500 grams.
摘要翻译:公开了一种具有可伸展阻挡膜的弹性液体不可渗透层压体; 包含密度小于0.89g / cm 3的低密度聚乙烯纤维的8g / m 2至100g / m 2的弹性体非织造网; 以及可伸展的布状外层,例如纺粘纤维的非织造纤维网。 阻隔层压板可以通过热点粘合层压,以产生具有改进的蓬松度,优异的手感并且同时实现超过500克的剥离强度的图案。
摘要:
A blown film process for producing low gauge, latent elastic films with high cross-direction orientation includes preferentially regulating the temperature gradient of the film along the expansion length. The regulation of temperature along the bubble profile allows more effective “down gauging” of the film and improved melt strength of the hot film. The choice of raw materials is an important element in producing cross-direction-oriented, low gauge, latent elastic films. The method of this invention can be carried out as either a multiple-bubble process or a single-bubble process.
摘要:
A composite material adapted for mechanical fastener use as a loop fastener component with a complementary hook component is made by laminating a film with an amorphous polymer layer to a prebonded nonwoven web under conditions producing laminate bonds corresponding to the prebond locations, and loose filaments or fibers between the bonds. The composite also desirably has a MVTR of at least about 100 g/m.sup.2 /24 hours and a hydrohead of at least about 50 mbar. In use as a component of a disposable personal care product such as a disposable diaper, the loop fastener component may be substantially the entire backing, providing comfort, protection and highly variable fit.
摘要翻译:适用于机械紧固件用作具有互补钩部件的环紧固件部件的复合材料通过在产生与预粘合位置相对应的层压结合的条件下的条件下将膜与非结晶聚合物层层压到预粘合的非织造纤维网上而制成,以及松散的长丝或纤维 债券之间。 复合材料还希望具有至少约100g / m 2/24小时的MVTR和至少约50mbar的氢头。 在作为一次性个人护理产品(例如一次性尿布)的组件使用中,环紧固件部件可以是基本上整个背衬,提供舒适性,保护性和高度可变配合。
摘要:
Transversely stretchable elastic laminated fabric with cloth-like facings was made by a two-step process. In the first step an inelastic laminate was made by continuously extruding an elastomer sheet between two plies of a fibrous sheet and joining the plies by applying pressure on them between a closed gap niproll assembly. Two longitudinal slits were made into the laminate. Then the rolls of inelastic laminate so made were taken to an oven and the laminate was unwound and pulled through the oven at an elevated temperature, while tension on the web was increased until the slits necked. The necked laminate was wound up on a takeup roll. When samples were unwound, surprisingly they did not grow in width, and they showed good CD-elasticity (elongation and springback). Breathability of the laminate was superior to the laminate formed using an open niproll assembly gap.
摘要:
Breathable microporous films are provided having controlled regional breathability with thick high WVTR regions and thinner low WVTR regions. The zoned breathable microporous films can be made by selectively applying heat and/or pressure to specific regions the microporous film such as by feeding a microporous film through a pair of heated nip rollers with one of the rolls having a raised surface area or by applying a focused stream of hot air. Monolayer microporous films and multilayer films having at least one microporous layer can be treated to impart zoned breathability to the film.
摘要:
A composite material adapted for barrier garment applications is made by laminating a film with an amorphous polymer layer to a prebonded nonwoven web under conditions producing laminate bonds corresponding to the prebond locations, and unbonded areas between the bonds while maintaining constant film thickness. The composite has enhanced resistance to viral penetration for use as a surgical gown material, for example, and also desirably has a MVTR of at least about 300 g/m2/24 hours and a hydrohead of at least about 50 mbar. In use as a component of a protective apparel such as a surgical gown or drape, the composite provides comfort and protection with reduced risk of film damage.
摘要翻译:适用于屏障服装应用的复合材料通过在产生与预粘合位置相对应的层压结合的条件下和在粘合之间的未粘合区域同时保持恒定的膜厚度的条件下将非晶形聚合物层的膜层压到预粘合的非织造纤维网上而制成。 该复合材料具有增强的抗病毒渗透性,用作手术礼服材料,例如,并且还希望具有至少约300g / m 2/24小时的MVTR和至少约50mbar的水头。 作为保护性服装(例如手术衣或披肩)的组分使用,复合材料提供了舒适和保护,降低了膜损伤的风险。
摘要:
Pattern embossed low gauge films are disclosed having multiple microporous film layers with distinct coloration, such as a dark colored layer and a light colored layer, wherein the color of the underlying film causes a visible color contrast only at the embossed regions and yet does not discolor the outer most layer. Also disclosed are film laminates and personal care articles incorporating such multilayer films.