摘要:
A rolled steel bar or a wire rod for hot forging capable of coping with both bending/surface fatigue strength of components and machinability at a high level includes: a composition containing, in mass %, C: 0.1 to 0.25%, Si: 0.01 to 0.10%, Mn: 0.4 to 1.0%, S: 0.003 to 0.05%, Cr: 1.60 to 2.00%, Mo: 0.10% or less (including 0%), Al: 0.025 to 0.05%, and N: 0.010 to 0.025%, where a value of fn1 represented in a following formula (1) satisfies 1.82≦fn1≦2.10: fn1=Cr+2×Mo (1); impurities containing P: 0.025% or less, Ti: 0.003% or less, and O (oxygen): 0.002% or less; and a cross section in which a maximum value/a minimum value of an average ferrite grain diameter is 2.0 or less when measurement by observation is randomly carried out in 15 visual fields with an area per visual field set to be 62500 μm2.
摘要:
A rolled steel bar or a wire rod for hot forging capable of coping with both bending/surface fatigue strength of components and machinability at a high level includes: a composition containing, in mass %, C: 0.1 to 0.25%, Si: 0.01 to 0.10%, Mn: 0.4 to 1.0%, S: 0.003 to 0.05%, Cr: 1.60 to 2.00%, Mo: 0.10% or less (including 0%), Al: 0.025 to 0.05%, and N: 0.010 to 0.025%, where a value of fn1 represented in a following formula (1) satisfies 1.82≦fn1≦2.10: fn1=Cr+2×Mo (1); impurities containing P: 0.025% or less, Ti: 0.003% or less, and O (oxygen): 0.002% or less; and a cross section in which a maximum value/a minimum value of an average ferrite grain diameter is 2.0 or less when measurement by observation is randomly carried out in 15 visual fields with an area per visual field set to be 62500 μm2.
摘要:
A rolled steel bar or wire rod having hot surface fatigue strength, wear resistance, and machinability even after hot forging has a composition containing C, Si, Mn, S, Cr, Mo (optional), Al, and N, with the balance being Fe and impurities. The chemical composition satisfies that fn1 defined by Formula (1) is 1.60 to 2.10. The structure of the rolled steel bar or wire rod for hot forging includes a ferrite-pearlite structure, a ferrite-pearlite-bainite structure, or a ferrite-bainite structure. A maximum value/a minimum value of average ferrite grain size, which is observed and measured randomly in 15 visual fields each having an area of 62500 μm2 in a cross section, is not more than 2.0. fn1=Cr+2×Mo (1), and each symbol of elements in Formula (1) is substituted by a content (mass %) of a corresponding element.
摘要:
A leave-on type hair cosmetic composition having the following two layers A and B: Layer A of an oil layer containing the following component (a) in an amount of 0.5-40% by mass in the hair cosmetic composition, (a) a highly polymerized silicone selected from dimethicone and dimethiconol and having a number average degree of polymerization of 1,000-20,000; and Layer B of a water layer containing the following components (b) and (c), (b) a water-soluble polymeric thickening agent, and (c) water.
摘要:
An exposure control apparatus for controlling an exposure adjustment mechanism on the basis of a captured image signal includes the following elements. A face detecting unit detects a face of a person appearing in a captured image on the basis of the captured image signal. A histogram data determining unit determines histogram data by setting a face detection region in the captured image according to detection information and detecting at least a brightness value of the face detection region from the captured image signal. A target brightness setting unit sets a target brightness range for desired brightness of the face. An exposure control amount determining unit determines, when a face is detected, an amount of control for the exposure adjustment mechanism by comparing the target brightness range with a brightness value at a peak of the histogram data or a brightness region in the vicinity of the peak.
摘要:
To provide a small active oxygen generating device capable of efficiently continuously generating active oxygen while supplying oxygen in the air. In the active oxygen generating device in which water is made to exist between an anode and a cathode composed of a base material containing a conductive polymer and by turning on electricity between the anode and the cathode, the conductive polymer deoxidizes the oxygen dissolved in the water to generate active oxygen, the cathode is rotatably installed about a conductive horizontal axis with part of the surface being projected over the surface of the water.
摘要:
An imaging apparatus can photograph without making a user feel a wasteful photographing impossible time and stress. The imaging apparatus has a light emission unit; an anticipated temperature calculator that calculates an anticipated temperature of the light emission unit based on a light emission state; and a controller for suppressing a charging current or a light emission energy of the light emission unit based on the anticipated temperature.
摘要:
There is provided an apparatus for producing a magnetic recording medium which enables a good-quality magnetic recording medium to be produced with an improved production efficiency. This apparatus comprises a back-coat layer-coating vacuum chamber, a magnetic layer-coating vacuum chamber, a lubricant layer-coating vacuum chamber and a slitting vacuum chamber provided in a housing under vacuum, wherein the back-coat layer-coating vacuum chamber includes a melting pot disposed under a substrate and containing a metal, an electron beam-emitting device, and a guiding roller for reversing the surfaces of the substrate; the magnetic layer-coating vacuum chamber includes a melting pot disposed under the substrate and containing a magnetic substance, an electron beam-emitting device, and an oxidizing gas introduction means; the lubricant layer-coating vacuum chamber includes a lubricant-providing means disposed under the substrate; and the slitting vacuum chamber includes a winding means, a slitter, and an oxidizing gas-providing means.
摘要:
To provide a small active oxygen generating device capable of efficiently continuously generating active oxygen while supplying oxygen in the air. In the active oxygen generating device in which water is made to exist between an anode and a cathode composed of a base material containing a conductive polymer and by turning on electricity between the anode and the cathode, the conductive polymer deoxidizes the oxygen dissolved in the water to generate active oxygen, the cathode is rotatably installed about a conductive horizontal axis with part of the surface being projected over the surface of the water.
摘要:
A face importance level determining apparatus for determining an importance level for a photographer with respect to a face of a person appearing in an image may include the following elements. A face information obtaining unit obtains face size information and position information that are detected from an input image signal. A first calculating unit calculates a first importance level factor on the basis of the size information. A second calculating unit calculates a second importance level factor on the basis of the position information. A third calculating unit calculates the importance level on the basis of the first importance level factor and the second importance level factor.