Abstract:
Methods, systems, and devices are described for power conservation in a wireless communications system through efficient transmissions and acknowledgements of information between an AP and a station. The time between a determination by a station to enter a power saving mode and entering network sleep mode by the station may be reduced through a transmission, by an AP, of an MPDU to the station successive to an SIFS after transmission of an acknowledgement to the station of a PS-Poll frame from the station. The time to enter a power saving mode by a station may also be reduced through transmission of A-MPDUs in which a last MPDU of the A-MPDU has an indicator bit cleared to indicate no additional data is to be transmitted. An AP may prevent a retransmission of an MPDU to the station in the absence of an acknowledgement from the station, to further enhance efficiency.
Abstract:
A wireless device is configured to switch data rates to account for temporary channel conditions or device configuration errors. Pre-selected data rates, more likely to achieve maximum goodput, are stored in a data rate table. The data rate table contains candidate data rates for each pre-selected data rate in the data rate table. When probe transmissions using the preselected data rates fail, dynamic rate probing is utilized to determine a possible cause and extent of the problem. The dynamic rate probing scheme transmits probe transmissions using the candidate data rates and tracks success or failure of these probe transmissions. An analysis of the probe transmissions is used to indicate a possible cause and/or extent of the problematic condition and to determine whether there is a need to reconfigure the data rates in the data rate table.
Abstract:
Systems and methods are disclosed for generating a statistical profile of a MIMO channel. Packets of information may be transmitted over an interval of time to a plurality of stations using a plurality of MIMO modes. Each packet may be binned and a goodput value corresponding to the bin, the station and the MIMO mode may be determined stored.
Abstract:
A method of providing rate adaptation in a multi-user wireless communication system including single-user beamforming (SU-BF) and multi-user multiple-input multiple-output (MU-MIMO) is described. In this method, a master rate, which is a modulation and coding scheme (MCS) for the SU-BF, is determined. An MCS for each transmit mode is derived from the master rate using a rate mapping. Using the results from the mapping, the master rate, instead of the MCS for each transmit mode, is tracked. In one embodiment, a mapping calibration is periodically performed.
Abstract:
Methods and devices are described for wireless communications associated with a multidimensional algorithm for roaming. In one aspect, an access point (or like device) transmits a beacon signal. The access point receives, from a station in receipt of the beacon signal, a probe signal including at least one metric. The access point transmits a response signal based at least in part on the received probe signal, the response signal including information associated with the at least one metric.
Abstract:
Methods, systems, devices, and apparatuses are described for wireless communications in which first type of traffic may be transmitted from a gateway access point (AP) directly to a station. Beacon signals transmitted to the station are transmitted as part of the first type of traffic. A second type of traffic may be transmitted from the gateway AP to the station via at least one relay AP. The first type of traffic may include low-throughput traffic and may be transmitted over a long-range radio link (e.g., 2 GHz band link or sub-1 GHz band link). The second type of traffic may include high-throughput traffic and may be transmitted over at least one short-range radio link (e.g., 5 GHz band link). The gateway AP may receive low-throughput traffic directly from the station and high-throughput traffic from the station via the at least one relay AP.
Abstract:
Methods, systems, and devices are described for power conservation in a wireless communications system through efficient transmissions and acknowledgements of information between an AP and a station. The time between a determination by a station to enter a power saving mode and entering network sleep mode by the station may be reduced through a transmission, by an AP, of an MPDU to the station successive to an SIFS after transmission of an acknowledgement to the station of a PS-Poll frame from the station. The time to enter a power saving mode by a station may also be reduced through transmission of A-MPDUs in which a last MPDU of the A-MPDU has an indicator bit cleared to indicate no additional data is to be transmitted. An AP may prevent a retransmission of an MPDU to the station in the absence of an acknowledgement from the station, to further enhance efficiency.
Abstract:
One innovation includes an apparatus, for wirelessly communicating with a communication system via a first wireless channel and a second wireless channel, including a memory unit that is configured to store a first data packet and a second data packet, the first data packet and the second data packet have consecutive sequence numbers. The apparatus further includes a processor configured to retrieve the first data packet and the second data packet from the memory unit, a transceiver that is configured to transmit the first data packet to the communication system via the first channel, to receive a first acknowledgement from the communication system and to transmit the second data packet to the communication system via the second channel after the processor detects that the first acknowledgement comprises a positive acknowledgement of the first reception information.
Abstract:
Methods and devices are described for wireless communications associated with a multidimensional algorithm for roaming. In one aspect, an access point (or like device) transmits a beacon signal. The access point receives, from a station in receipt of the beacon signal, a probe signal including at least one metric. The access point transmits a response signal based at least in part on the received probe signal, the response signal including information associated with the at least one metric.
Abstract:
Various aspects of apparatus for accessing a network through a wireless access point and methods of power savings for such apparatus include autonomously alternating between a listen state and the sleep state during a time period in which no data is detected from the remote apparatus, and progressively increase the sleep state interval during the time period for at least a portion of the time period.