摘要:
A heater control device having at least two PTC heaters having PTC elements includes switching units which are provided so as to correspond to the PTC heaters and which switch an energized state and a non-energized state of the PTC elements by being turned ON and OFF, pattern information which defines state combination patterns of the energized state and the non-energized state of the PTC elements with respect to a required power value for the heater unit, and a ratio controlling unit which when the required power for the heater unit is at an intermediate value of the required power values defined in the pattern information, controls a ratio of the energized state to the non-energized state of the PTC elements based on a ratio of ON time to OFF time for which an average power within a certain period matches the required power.
摘要:
A heater control device having at least two PTC heaters having PTC elements includes switching units which are provided so as to correspond to the PTC heaters and which switch an energized state and a non-energized state of the PTC elements by being turned ON and OFF, pattern information which defines state combination patterns of the energized state and the non-energized state of the PTC elements with respect to a required power value for the heater unit, and a ratio controlling unit which when the required power for the heater unit is at an intermediate value of the required power values defined in the pattern information, controls a ratio of the energized state to the non-energized state of the PTC elements based on a ratio of ON time to OFF time for which an average power within a certain period matches the required power.
摘要:
A heater control device includes a current calculating unit (20) which calculates a third value of current based on a first value of current flowing through a first PTC element of a first PTC heater which is in an energized state and a second value of current estimated to flow through a second PTC element of a second PTC heater which is to be newly put into an energized state next, and a switching control unit (21) which maintains a non-energized state of the second PTC element of the second PTC heater until it is determined that the third value of current calculated by the current calculating unit (20) is less than a predetermined maximum allowable value of current and puts the second PTC element of the second PTC heater into an energized state when the third value of current is less than the predetermined maximum allowable value of current.
摘要:
A heater control device includes a current calculating unit (20) which calculates a third value of current based on a first value of current flowing through a first PTC element of a first PTC heater which is in an energized state and a second value of current estimated to flow through a second PTC element of a second PTC heater which is to be newly put into an energized state next, and a switching control unit (21) which maintains a non-energized state of the second PTC element of the second PTC heater until it is determined that the third value of current calculated by the current calculating unit (20) is less than a predetermined maximum allowable value of current and puts the second PTC element of the second PTC heater into an energized state when the third value of current is less than the predetermined maximum allowable value of current.
摘要:
An object is to provide an integrated-inverter electric compressor with which it is possible to reduce electromagnetic radiation noise, it is also possible to reduce the amount of external current leakage, and, additionally, even the amount of external current flow from an earth wire, and, moreover, it is possible to reduce the size, weight, and cost of a noise-reduction circuit. In an integrated-inverter electric compressor (1) in which an inverter (5) that controls power to be applied to an electric motor (3) is integrally installed in a housing (2) that contains, inside thereof, a compression mechanism and the electric motor (3) that drives the compression mechanism, impedances (Z) having the same capacitance are individually inserted and connected between the housing (2), which is chassis-grounded and into which harmonic currents from the inverter (5) and the electric motor (3) flow, and PN lines (7) that supply power from a power source to the inverter (5).
摘要:
In an inverter in which noise reducing coils and a smoothing capacitor are provided on a power line to an inverter module to achieve a no-busbar configuration, simplification of the manufacturing process, reduction of the influence on the size of the inverter, enhanced noise reducing function, reduction in cost and so on, the smoothing capacitor is electrically connected, on the inverter module, to the power line in parallel with a power system board, and the noise reducing coils are connected to the power line by directly connecting output lead wires thereof to P-N terminals of the inverter module.
摘要:
In an inverter in which noise reducing coils and a smoothing capacitor are provided on a power line to an inverter module to achieve a no-busbar configuration, simplification of the manufacturing process, reduction of the influence on the size of the inverter, enhanced noise reducing function, reduction in cost and so on, the smoothing capacitor is electrically connected, on the inverter module, to the power line in parallel with a power system board, and the noise reducing coils are connected to the power line by directly connecting output lead wires thereof to P-N terminals of the inverter module.
摘要:
There is provided an inverter device that is small in size and has high durability against long-term use with vibration. A power substrate 20 is placed at a bottom portion of a box-shaped module case 11, and a control substrate 30 forms a lid of an opening in the module case 11, and thus an inverter device 10 of the present invention is modularized, thereby reducing a height of the inverter device 10. In the inverter device 10, a capacitor 22 is provided between the power substrate 20 and the control substrate 30, and the capacitor 22 is covered with a resin mold layer 12 and fixed in the module case 11. The capacitor 22 is fixed in the module case 11 by the resin mold layer 12, which provides higher durability against vibration than that by conventional fastening with a screw.
摘要:
An integrated-inverter electric compressor whose grounding effect and grounding reliability are increased by reliably grounding an inverter device to a housing and in which the size the inverter device are reduced by simplifying the grounding structure is provided. The integrated-inverter electric compressor includes an inverter device provided in an inverter container on the outer circumference of a housing. The inverter device includes an inverter module formed by integrating a power-related metal substrate and a resin case and is provided with a control-related substrate on the upper surface of the inverter module; the resin case is integrated with mounting legs provided at a plurality of locations on the circumference; the mounting legs are grounded to the power-related metal substrate and the control-related substrate; and grounding terminals, which frame-ground the substrates to the housing, are insert-molded in such a manner that the grounding terminals are securable to the inverter container with screws.
摘要:
An object is to provide a motor-driven compressor capable of reducing cost required when a failure occurs in part of components configuring an inverter device. A power substrate assembly 50 is removably fixed to a housing body 10 in an inverter accommodation chamber 13, and a control substrate assembly 70 and a filter circuit assembly 90 are removably fixed to a cover 30. Therefore, when the cover 30 is removed from the housing body 10, the power substrate assembly 50, the control substrate assembly 70, and the filter circuit assembly 90 can be independently removed from the housing body 10 or the cover 30, and new power substrate assembly 50, control substrate assembly 70, and filter circuit assembly 90 can be independently mounted on the housing body 10 or the cover 30.