摘要:
An apparatus and system for onboarding based on UE default manufacturer credentials are described. A UE sends default manufacturer credentials and an indication to proceed with restricted onboarding to an onboarding non-public network (O-SNPN). An Onboarding Server validates the authenticity of the UE based on the manufacturer credentials and sends a certificate. The UE is provisioned with a set of roots of trust certificate information to use to authenticate the certificate using one way authentication. After authentication, the UE receives network credentials and performs mutual authentication to register with a NPN while being authenticated by a home network. The UE identity is indicated as anonymous in response to an indication by the O-SNPN for subscriber identifier privacy.
摘要:
An apparatus and system for onboarding network behavior based on the type of UE and identification information are described. The identification information, if provided by the UE, is provided either during an initial registration procedure or a configured PDU session establishment procedure and includes one or both of an SO-SNPN and provisioning server identity. The UE, if identification information is provided by an SMF, overwrites the default identification information stored in the UE and performs provisioning server discovery on a provisioning server identity in the identification information. If the UE does not store provisioning server identification, the UE constructs a well-defined FQDN to perform provisioning server discovery.
摘要:
Some demonstrative embodiments include devices, systems of selectively providing Internet Protocol (IP) session continuity. In one example, a mobile device may include a radio to communicate with a wireless network, the radio to transmit a session setup request to setup a communication session, and to receive a session setup response in response to the session setup request, the session setup response including a first Internet Protocol (IP) address and a second IP address assigned to the communication session, and an indication that the first IP address is configured to maintain IP session continuity; and a controller to select to use the first IP address for the communication session, if IP session continuity is to be maintained for the communication session, and to select to use the second IP address for the communication session, if IP session continuity is not to be maintained for the communication session.
摘要:
Embodiments of a Next Generation Node-B (gNB) and methods of communication are disclosed herein. The gNB may be configured with a gNB-CU and a gNB-DU. A first paging message for paging of the UE may be received at the gNB-CU from an access management function (AMF) entity. The first paging message may include: a paging identity of the UE; and a paging origin information element (IE) that indicates whether the paging of the UE is originated due to a protocol data unit (PDU) session from non-3GPP access. A second paging message to page the UE may be transmitted from the gNB-DU to the UE. The second paging message may include: the paging identity of the UE; and an access type parameter that indicates whether the paging of the UE is originated due to the PDU session from the non-3GPP access.
摘要:
In order to perform SIPTO@LN for PDN connections, MME performs: receiving, from a HeNB, information about one or more GWs, said information comprising an IP address of each local GW and at least one among APN-specific information for said one or more local GWs and/or a non-APN-specific indication for said one or more local GWs; initiating, based on subscription data and the received information about a particular local GW among said one or more local GWs, deactivation of one or more PDN connections by sending to UE a NAS Deactivate Bearer Request message indicating that reactivation is required for said one or more PDN connections; and selecting, in response to a reactivation attempt by the UE and based on said subscription data and the received information about said particular local GW, said particular local GW to allow SIPTO@LN to be performed via said particular local GW.
摘要:
When a UE in an LTE system enters the RRC_IDLE state, only the S5/S8 EPS bearer context is retained, and the S1-U, S1-AP and radio bearers are released. These bearers have to be re-established on per UE basis when the UE returns to RRC_CONNECTED state. A number of UE applications may send small data frequently, which causes the UE to toggle between IDLE and CONNECTED states. This leads to a great deal of signaling overhead as the radio bearer and the S1-U bearer must be frequently re-established as the UE transitions between IDLE to CONNECTED states. Described herein are methods and systems that provide an always-on S1-U bearer to reduce this signaling overhead.
摘要:
Embodiments for providing network-assisted to direct device discovery switch are generally described herein. In some embodiments, location information is received at an evolved packet core (EPC) from at least a first and a second user equipment (UE). A network-assisted device-to-device (D2D) request is received from the first UE for establishing a D2D wireless connection with the second UE. Proximity of the first UE and the second UE are monitored. Before detecting the second UE being in proximity to the first UE, direct discovery is determined to be more resource efficient than continuing to provide network-assisted D2D discovery. An indication is provided to the first UE and the second UE to perform direct discovery based on information provided in the indication.
摘要:
Various systems and methods for providing identifiers for proximity services are described herein. A proximity server to provide identifiers for proximity services comprises: a receiving module to receive from a requester user equipment (UE) at a proximity services server, a request to connect the requester UE to a connection UE, the request including a user-defined proximity identifier that identifies the connection UE; a permission module to confirm permission for the requester UE to connect to the connection UE; and an output module to, based on the confirmation, provide a first link layer identifier (LLID) to the connection UE for use in direct discovery between the requester UE and the connection UE.
摘要:
A method and system for establishing a secure device-to-device connection between two mobile devices involves the use of a WiFi Direct (LTE Direct or other similar protocols) link paired with an IP Multimedia Subsystems (IMS) link. A device detects the presence of another device that it wishes to connect to. The devices negotiate a group owner, then authenticate each other using a variety of techniques, such as a centrally issued certificate. Thereafter, the devices derive keys to be used for communication, both over the WiFi Direct link and via the IMS link. A WiFi Direct Link may be paired with a Push to Talk over Cellular (PoC) link in order to couple together more than two devices. In such a connection, devices transmit to a group owner, which then sends multicast versions to the rest of the group devices.
摘要:
An apparatus used in a UE includes processing circuitry and memory. To configure the UE for a DNS resolution, the processing circuitry is to encode UL data for transmission to a first EAS via a first data path. The first data path includes a first UL CL UPF and a first PSA. A NAS SM message received from an SMF node is decoded. The NAS SM message includes an EAS rediscovery indication and a list of FQDNs associated with the first EAS. A DNS resolution procedure with a DNS server is performed in response to the EAS rediscovery indication, to obtain an IP address of a second EAS. The DNS resolution procedure is based on the list of FQDNs, and a second data path to the second EAS is established based on the IP address.