摘要:
A biaxially oriented polyester film which has excellent resistances to dry heat deterioration and wet heat deterioration, which can withstand the use in an atmosphere of relatively high moisture content, and which is useful, for example, as an electrical insulating film, a film for transparent electrode, a film for absorption of electromagnetic wave (e.g. a film used as an inspection window of microwave oven) and a reflection film. This polyester contains �ethylene-2,6-naphthalenedicarboxylate as the main recurring unit.! 99.5 to 95 mole % of ethylene-2,6-naphthalenedicarboxylate and 0.5 to 5 mole % of ethylene-2,7-naphthalenedicarboxylate and has a density of 1.355 to 1.370 g/cm.sup.3 and an intrinsic viscosity of 0.62 to 0.90. The polyester film has an amount of terminal carboxyl in the polyester of 40 eg/10.sup.6 g or less and an amount of oligomers of 2.0 mg/m.sup.2 film or less.
摘要翻译:一种双轴取向聚酯薄膜,其具有优异的干热劣化和湿热劣化性,其可以承受在较高含水量的气氛中的使用,并且其可用于例如电绝缘膜,透明膜 电极,用于吸收电磁波的膜(例如用作微波炉的检查窗的膜)和反射膜。 该聚酯含有[乙烯-2,6-萘二甲酸酯作为主要重复单元] 99.5-95摩尔%的乙烯-2,6-萘二羧酸酯和0.5-5摩尔%的乙烯-2,7-萘二甲酸酯,并且具有 1.355〜1.370g / cm 3,特性粘度为0.62〜0.90。 聚酯薄膜的聚酯中的末端羧基的量为40,例如/ 106g以下,低聚物的量为2.0mg / m 2以下。
摘要:
A magnetic recording tape or disk formed from a biaxially oriented laminated polyester base film which comprises a layer (A) of a polyester consisting essentially of 2,6-naphthalenedicarboxylic acid and ethylene glycol components and a layer (B) of a copolyester consisting essentially of 2,6-naphthalenedicarboxylic acid, ethylene glycol, and diethylene glycol components, wherein the copolyester contains 1-5% by weight of the diethylene glycol component, based on the weight of the layer (B) copolyester, layer (B) being present on one or both surfaces of layer (A).
摘要:
Provided is a biaxially oriented, unidirectionally long polyethylene-2,6-naphthalenedicarboxylate film having the following characteristic properties;(A) both the Young's modulus in the longitudinal direction and the Young's modulus in the transverse direction are at least 600 kg/mm.sup.2, and the Young's modulus in the longitudinal direction is greater than the Young's modulus in the transverse direction,(B) the heat shrinkage factor in the transverse direction when the film has been treated under no load at 105.degree. C. for 30 minutes is at least 1%, and(C) the surface roughness Ra of one surface of the film is up to 5 nm, anda magnetic recording tape obtained by forming a thin magnetic metal film on the above film undergoes no curling, has high coercive force, has excellent electromagnetic conversion characteristic and permits high-density recording for a long period of time.
摘要:
An oriented polyester film (A) which comprises modified polyethylene-2,6-naphthalenedicarboxylate containing a 4,4'-diphenyldicarboxylic acid component and having a heat of crystallization of 16 to 25.5 Joule/g, and (B) which is biaxially oriented; and an oriented polyester film (A') which comprises modified polyethylene-2,6-naphthalenedicarboxylate containing of a glycol component derived from a compound represented by the following formula, ##STR1## wherein each of n and m is independently a positive number of 1 to 9 as an average, provided that m+n equals 2 to 9 as an average, and having a heat of crystallization of 6 to 20 Joule/g, and (B) which is biaxially oriented. These films are useful as a base film for a magnetic recording tape or as an electric insulation film.
摘要:
A magnetic recording flexible disc composed of a polyester film substrate having formed thereon a magnetic layer, the improvement wherein said polyester film is a biaxially oriented film consisting of poly-1,4-cyclohexylene dimethylene terephthalate wherein at least 90 mole % of a glycol component is 1,4-cyclohexanedimethanol and at least 80 mole % of an acid component is terephthalic acid, a maximum value of a temperature dependent expansion in the surface direction of the film is 9.times.10.sup.-6 to 35.times.10.sup.-6 /.degree.C., a maximum value of a humidity dependent expansion in the surface direction of the film is 0 to 8.0.times.10.sup.-6 /% RH, the difference between the maximum and minimum values of the temperature dependent expansion in the surface direction of the film is 0 to 8.0.times.10.sup.-6 /.degree.C., and the difference between the maximum and minimum values of the humidity dependent expansion in the surface direction of the film is 0 to 3.0.times.10.sup.-6 /% RH.
摘要:
A biaxially oriented polyethylene-2,6-naphthalate film, which comprises a blended mixture of1. a polyethylene-2,6-naphthalate resin which may contain a unit derived from not more than 10mol% of a polyester-forming component other than a polyethylene-2,6-naphthalate-forming component, and2. 0.5 to 10% by weight, based on the polyethylene-2,6-naphthalate resin (1), of a polyester resin other than the polyethylene-2,6-naphthalate resin (1) in which the amount of the homopolyester unit is at least 90 mol%,Said film having a softing point at least 1.degree.C. higher than the its equilibrium softening point, and a process for its production.
摘要:
A can manufacturing device in which a tool supporting base has: a plurality of working tool units that support a plurality of working tools; a supporting member that supports a plurality of working tool units; and a linear driving mechanism that reciprocates the working tool units with respect to the supporting member in the axial direction of a workpiece. The linear driving mechanism has: a guide section that is fixed on the supporting member with a base plate therebetween; a slide rail that is fixed on the working tool unit and slides along the guide section; an electromagnetic coil provided on the base plate; a magnet plate that is provided on the working tool unit and generates, between the electromagnetic coil and itself, a thrust force for the guide section; and a supply pipe that is provided at the electromagnetic coil and supplies coolant to the inside of the electromagnetic coil.
摘要:
An oxide superconductor member is composed of a tape-shaped substrate, an intermediate layer formed on this substrate and an oxide superconductor thin film layer formed on this intermediate layer. A surface of the tape-shaped substrate is polished by continuously running the tape-shaped substrate. The polishing step includes initial polishing process and finishing process which are carried out such that the average surface roughness Ra of the substrate becomes 2 nanometers or less and the in-plane directionality of the intermediate layer becomes 5° or less after the polishing step.
摘要:
An effective thread number in the thread section which is disposed on the mouth section of the bottle is formed to be 2.2. That is, the thread section is formed such that the thread section 13 should serve effectively in the mouth section such that an interval between a start position and an end position should be 2.0 to 2.5. In the bottle can member 11 which has such a thread section, an outer diameter of the thread section which is formed on the mouth section is 28 to 38 mm. Also, the thickness of the mouth section is 0.25 to 0.4 mm. The thread section which has the effective thread number 2.0 to 2.5 is formed by eight-thread per inch pitch. By doing this, it is possible to put the cap desirably.
摘要:
In this bottle can manufacturing method, when a portion located at the skirt portion 7 is being molded, the portion extending in an opposite direction in which the male threaded portion 6 extends from a lower end 6a of the male threaded portion 6 over a range of at least approximately 180° along a circumferential direction of the skirt portion 7, the inner surfaces of molding pre-form portions of the first circumferential wall portion and the convexly curved surface portion from among the molding pre-form portions of the skirt portion 7 are pressed outward in the radial direction of the bottle can body.