摘要:
Techniques are provided for compensating for phase and timing delays in clock signals generated by phase-locked loops and delay-locked loops on integrated circuits. Circuit elements coupled in a feedback loop of a locked circuit can compensate for the timing and phase delays between an input pin and an output pin. Other circuit elements coupled in the feedback loop of a locked circuit can compensate for the delay between an input pin and a destination circuit element. Still other circuit elements coupled in an input reference path of a locked circuit preserve a timing relationship between input clock and input data signals. A clock signal and a data signal received at a destination circuit element have the same phase and timing relationship that exists between the input clock and input data signals at input pins.
摘要:
A feedback loop, such as a phase-locked loop, on an integrated circuit has a detector, a charge pump, and a loop filter. The charge pump adjusts its output current in response to variations in a process of the integrated circuit to reduce variations in the loop bandwidth. The charge pump also adjusts its output current in response to variations in a resistance of a resistor in the loop filter to reduce variations in the loop bandwidth. The charge pump can also adjust its output current in response to variations in a temperature of the integrated circuit to reduce variations in the loop bandwidth. A delay-locked loop on an integrated circuit has a phase detector and a charge pump. The charge pump adjusts its output current in response to variations in the temperature and the process of the integrated circuit to reduce changes in the loop bandwidth.
摘要:
Techniques are provided for dynamically reconfiguring programmable circuit blocks on integrated circuits during user mode. First configuration bits are loaded from first configuration scan registers into second configuration scan registers during configuration mode. The first configuration bits are used to configure programmable settings of a programmable circuit block. During user mode, second configuration bits are transmitted from a pin to the second configuration scan registers without transferring the second configuration bits through the first configuration scan registers. The second configuration bits are used to reconfigure the programmable settings of the programmable circuit block during the user mode. Also, phase shift circuitry can dynamically shift the phase of an output clock signal by selecting a different input clock signal. The phase shift circuitry has a delay circuit that allows the phase of a high frequency clock signal to be shifted without causing glitches in the clock signal.
摘要:
An integrated circuit (“IC”) may include clock and data recovery (“CDR”) circuitry for recovering data information from an input serial data signal. The CDR circuitry may include a reference clock loop and a data loop. A retimed (recovered) data signal output by the CDR circuitry is monitored by other control circuitry on the IC for a communication change request contained in that signal. Responsive to such a request, the control circuitry can change an operating parameter of the CDR circuitry (e.g., a frequency division factor used in either of the above-mentioned loops).
摘要:
Methods and apparatus are provided for generating a clock signal with relatively high bandwidth and relatively low phase noise. A circuit of the invention can include a pair of transistors serially coupled between a signal of relatively high voltage and a source of relatively low voltage, where a voltage of the signal of relatively high voltage can vary according to a voltage of a variable control signal. A gate of one of the pair of transistors can be coupled to an input clock signal, and an output node between the pair of transistors can be coupled to an output clock signal. The circuit can also include a third transistor, whose drain and source are coupled to the output clock signal, and whose gate can be coupled to a gear input signal. This circuit can advantageously operate under at least two different gears, each with different bandwidth and phase noise characteristics.
摘要:
An integrated circuit (“IC”) may include clock and data recovery (“CDR”) circuitry for recovering data information from an input serial data signal. The CDR circuitry may include a reference clock loop and a data loop. A retimed (recovered) data signal output by the CDR circuitry is monitored by other control circuitry on the IC for a communication change request contained in that signal. Responsive to such a request, the control circuitry can change an operating parameter of the CDR circuitry (e.g., a frequency division factor used in either of the above-mentioned loops). This can help the IC support communication protocols that employ auto-speed negotiation.
摘要:
Methods and apparatus are provided for generating a clock signal with relatively high bandwidth and relatively low phase noise. A circuit of the invention can include a pair of transistors serially coupled between a signal of relatively high voltage and a source of relatively low voltage, where a voltage of the signal of relatively high voltage can vary according to a voltage of a variable control signal. A gate of one of the pair of transistors can be coupled to an input clock signal, and an output node between the pair of transistors can be coupled to an output clock signal. The circuit can also include a third transistor, whose drain and source are coupled to the output clock signal, and whose gate can be coupled to a gear input signal. This circuit can advantageously operate under at least two different gears, each with different bandwidth and phase noise characteristics.
摘要:
A phase frequency detector compares a reference clock signal to a feedback clock signal to generate pulses in one or more output signals. The one or more output signals have a minimum pulse width. The phase frequency detector has a temperature sensing circuit. The phase frequency detector adjusts the minimum pulse width of the one or more output signals using the temperature sensing circuit to compensate for variations in the temperature of the phase frequency detector.
摘要:
A phase frequency detector compares a reference clock signal to a feedback clock signal to generate pulses in one or more output signals. The one or more output signals have a minimum pulse width. The phase frequency detector has a temperature sensing circuit. The phase frequency detector adjusts the minimum pulse width of the one or more output signals using the temperature sensing circuit to compensate for variations in the temperature of the phase frequency detector.
摘要:
Integrated circuits having transceivers capable of high-speed (e.g., 1 Gbps) operation without dedicated phase-locked loop circuitry are provided. One such integrated circuit device may include one or more transceivers capable of transmitting and receiving serial signals of approximately 1 Gbps or greater, and a multi-purpose phase-locked loop capable of providing a multi-phase clock signal to the one or more transceivers.