摘要:
An apparatus with load dump protection incorporates first and second half-bridge circuits, first and second comparators, and first and second clamping circuits. The first comparator compares a supply voltage with a first set voltage and generates a first comparison signal while the supply voltage exceeds the first set voltage. The second comparator compares the supply voltage with a second set voltage and generates a second comparison signal while the supply voltage exceeds the second set voltage. The first clamping circuit divides the supply voltage and provides a divided voltage to the first half-bridge circuit in response to the second comparison signal. The second clamping circuit divides the supply voltage and provides a divided voltage to the second half-bridge circuit in response to the second comparison signal.
摘要:
An integrated circuit comprising: an input terminal configured to receive a failure-event-signal representative of a failure event; a first output terminal configured to provide a first-failure-signal; and a second output terminal configured to provide a second-failure-signal; and a processing block configured to: set the first-failure-signal based on the failure-event-signal; and set the second-failure-signal, at a predetermined time interval after the first-failure-signal is set. The processing block further comprises a switch configured selectively, based on a received digital-error-signal to either: set the second-failure-signal based on a digital-counter-output-signal; or set the second-failure-signal based on an analogue-trigger-signal.
摘要:
A torque system includes a DC power device, a polyphase electric machine, a contactor pair, a power inverter module (PIM), and a controller. The PIM connects to the power device via the contactor pair and directly connects to the electric machine. The controller executes a method to control a fault response under a fault condition resulting in opening of the contactor pair and a polyphase short condition. The controller calculates a back EMF of the electric machine and transmits switching control signals to semiconductor switches of the PIM to transition from the polyphase short condition to a polyphase open condition only when the calculated back EMF is less than a calibrated value and a voltage rise on a DC side of the PIM is less than a calibrated voltage rise. A vehicle includes the DC power device, road wheels, electric machine, PIM, and controller.
摘要:
A motor controller includes an inverter configured to convert a direct current to an alternating current, a control unit that generates a PWM signal for driving the inverter in response to a motor drive command from an external device, and a safety circuit arranged between the inverter and the control unit. The inverter includes an upper switching element and a lower switching element. The safety circuit includes logic gates which are provided corresponding to the upper switching element and the lower switching element, respectively and each of which has two or more inputs to cut off the PWM signal based on a safety input signal.
摘要:
A motor drive circuit for use in driving a motor having two or more phases comprising a motor bridge having, for each phase of the motor, a bridge arm comprising an upper switch and a lower switch that in normal operation may be opened and closed to modulate the voltage applied to the respective phases in response to drive signals from a motor control circuit, at least one solid state phase isolation relay that is provided in series in an electrical path connecting a respective phase of the motor to a respective bridge arm, the relay being closed in normal operation so that current can flow in the phase and is held open in a fault mode of operation to prevent the flow of current in the phase. The circuit also includes monitoring means for monitoring the current waveform in the phase to provide, at least in a fault mode of operation, an output indicative of when it is safe to open the SSPIR without causing damage due to the SSPIR due to an avalanche mode, and a control circuit that during normal operation applies a voltage to each device that is sufficient to hold the SSPIR closed and which, in the fault mode of operation, responds to the output of the monitoring means to reduce the voltage applied to each SSPIR to a level that causes the SSPIR to open at the safe time.
摘要:
An electric motor system having substantially independent hardware-based and software-based pathways for detecting and initiating responses to fault conditions, such as over-current conditions, in an electric motor which is powered by a power inverter which is controlled by a power module and a microprocessor. Each pathway involves comparing a voltage, which is representative of an electric current flowing to the motor, to a predetermined maximum voltage, and if the former exceeds the latter using hardware or software to initiate shutting off the motor, such as by shutting off the power inverter. When one pathway detects a fault condition it may notify the other pathway, and the notified pathway may also initiate shutting off the motor.
摘要:
A solid state relay for controlling a three-phase AC motor running direction is provided, a driver module, power components module, phase sequence detection module, phase lack detection module, and automatic phase correction and phase lack protection logic module. The input of the phase sequence detection module is connected to the three-phase power supply, and the output is connected to the automatic phase correction and phase lack protection logic module, to provide phase sequence detection and a phase sequence signal to the automatic phase correction and phase lack protection logic module. The input of the phase lack detection module is connected to the three-phase power supply, and the output is connected to the automatic phase correction and phase lack protection logic module, to detect a lack of phase and provide the lacking phase signal to the automatic phase correction and phase lack protection logic module.
摘要:
In accordance with an embodiment, a circuit includes a snubber circuit configured to be coupled to outputs of n half-bridge driver circuits that are coupled to n corresponding inductive loads, such that n is an integer greater than one. The snubber circuit includes n diodes and n capacitors. Each of the n diodes are coupled between a corresponding output of the n half-bridge driver circuits and a floating common node, and each of the n capacitors coupled between a corresponding output of the n half-bridge driver circuits and the floating common node.
摘要:
An electric motor system having substantially independent hardware-based and software-based pathways for detecting and initiating responses to fault conditions, such as over-current conditions, in an electric motor which is powered by a power inverter which is controlled by a power module and a microprocessor. Each pathway involves comparing a voltage, which is representative of an electric current flowing to the motor, to a predetermined maximum voltage, and if the former exceeds the latter using hardware or software to initiate shutting off the motor, such as by shutting off the power inverter. When one pathway detects a fault condition it may notify the other pathway, and the notified pathway may also initiate shutting off the motor.
摘要:
A method and apparatus for controlling a motor. The motor comprises windings. A switch bridge comprising a plurality of switches is configured to couple a power source to the windings. A motor controller is configured to control the plurality of switches. An undesired condition identifier is configured to identify an undesired condition when the motor is providing power to the power source, wherein the undesired condition is defined with respect to a characteristic of the power source. An undesired condition reducer is configured to reduce the undesired condition in response to identifying the undesired condition by the undesired condition identifier.