摘要:
A method is provided to determine erase threshold voltages of memory transistors and thereby identify unusable memory transistors. A voltage is applied to the common source of a selected memory transistor and gradually incremented until a logical HIGH bit is read as a logical LOW bit. By iteratively incrementing Vbias, the erase threshold voltage for each memory transistor can be determined. In one process, the erase threshold voltage for each memory transistor in a memory device is determined and then the memory device is put under stress tests to simulate normal operative conditions. After the stress tests, the erase threshold voltage of each memory transistor can be once again determined to ascertain the change in the erase threshold voltage, i.e., the data retention characteristic, of each memory transistor.
摘要:
A memory system has the capability to adjust a program or erase voltage if the time to program or erase is excessive. The memory system comprises at least a memory cell, a voltage value storage device, a voltage source, and a voltage adjustment circuit. The voltage value storage device stores a voltage value. The voltage source receives and converts the voltage value into a voltage. The voltage source applies the voltage to at least one memory cell. The voltage adjustment circuit is also coupled to receive the stored voltage value. The voltage adjustment circuit determines the time required to program or erase at least one memory cell using the voltage value. If the time to program or erase at least one memory cell is excessive, the voltage adjustment circuit increments the voltage value stored in the voltage value storage device.
摘要:
A decoder for decoding from two sides of a memory array. The decoder is positioned on two sides of the memory array. The decoder includes driver circuits that are connected to routing lines from the memory array. To reduce the size of the decoder, some of the routing lines extend from one side of the memory array and the remaining routing lines extend from the other side of the memory array.
摘要:
A non-volatile memory device includes a plurality of MOS transistors 34 and 36 connected to respective word lines 16 and 18 to allow individual pages of memory stored in the memory cells 8a, 10a and 8b, 10b on the respective word lines 16 and 18 to be erased and erase verified. A method of erasing a page of memory cells includes the steps of applying an erase voltage to one of the MOS transistors 16 and 18 to erase the page of memory cells along the respective word line, and applying an initial erase-inhibit floating voltage to other MOS transistors which are connected to the word lines unselected for page erase. In an erase verify mode, an erase verify voltage is applied to the word line which was selected for page erase in the erase mode, and an erase verify unselect voltage is applied to the word lines which was not selected for page erase.
摘要:
An non-volatile read only memory transistor for use in a memory array is disclosed. The non-volatile read only memory transistor features a substantially vertically oriented channel fabricated in a trench formed in the substrate. The channel length is dependent upon the depth of the trench and therefore a dense array of NROM transistors can be formed without adversely affecting the channel length and therefore the operational performance of the transistor.
摘要:
A method for boosting potential in the channel of unselected memory cells on a selected bit-line. In this method, a first voltage is applied to all the word-lines of the memory cells in the string. A second voltage is then applied to word-lines adjacent the selected word lines to isolate the selected memory cell. Next, a programming voltage is applied to the selected word-line. In one embodiment, a time delay is applied between applying the second voltage and applying the third voltages to ensure isolation of the selected memory cell before applying the third voltage.
摘要:
In the programming of a non-volatile memory device, such as a NAND flash memory device 100, a positive bias voltage V.sub.bias is applied to a bit line 44 to set a respective memory gate 44a in a programmed state. In a further embodiment, the positive bias voltage V.sub.bias is obtained by dividing the select drain gate voltage V.sub.cc using two resistors 56 and 58 connected in series.
摘要:
A flash memory including a page buffer with bias circuitry and a reference array enabling reading and verifying values stored on a word line of memory cells in parallel using the page buffer irrespective of temperature, Vcc, and process variations. The bias circuitry includes a cascode transistor having a source connected to the reference cell array which provides a single reference signal. The bias cascode couples the reference signal to an input of a bias inverter in the bias generator, while a bias load transistor in the bias generator couples Vcc to the bias inverter input. The page buffer includes a set of latches that are each coupled to a memory cell by a cascode. A first inverter in each latch has transistors with sizes matching the transistors in the bias inverter. A latch load transistor is connected between a pull-up and pull-down transistor of a second inverter in each latch and is sized to match the bias load transistor. Gates of the bias load transistor and the latch load transistor are both coupled to the output of the bias inverter enabling the first inverter of each latch to have an input mirroring the input of the bias inverter.
摘要:
A programming control circuit programs a memory cell in accordance to a programming signal value that can be varied by a test equipment. The programming control circuit comprises a signal storage device, a signal output circuit, and a verification circuit. The signal storage device stores the programming signal value. The test equipment can be coupled to the signal storage device to write the programming signal value into the signal storage device. The signal output circuit is coupled to the signal storage device to receive the programming signal value. The signal output circuit converts the programming signal value into a programming signal and outputs the programming signal to the memory cell. The verification circuit determines whether the memory cell is successfully programmed. If the memory cell is not successfully programmed, the programming control circuit increases the programming signal value.
摘要:
A method and circuit for sensing multi states of a NAND memory cell by applying plurality of external sensing bias current at a constant positive gate and bias voltage and detecting a cell current wherein the cell current depends upon the state of the memory cell.