摘要:
A multi media card (MMC) is disclosed. The MMC includes a flash controller and at least one flash memory device. The flash controller increases the throughput of the at least one flash memory device to match the speed of a host bus coupled to the MMC. The flash controller increases the throughput by performing one or more of performing a read-ahead memory read operation, performing a write-ahead memory write operation, increasing the size of a page register of the at least one flash memory device, increasing the width of a memory data bus, performing a dual-channel concurrent memory read operation, performing a dual-channel concurrent memory write operation, performing a write-cache memory write operation, and any combination thereof.
摘要:
A multi media card (MMC) is disclosed. The MMC includes a flash controller and at least one flash memory device. The flash controller increases the throughput of the at least one flash memory device to match the speed of a host bus coupled to the MMC. The flash controller increases the throughput by performing one or more of performing a read-ahead memory read operation, performing a write-ahead memory write operation, increasing the size of a page register of the at least one flash memory device, increasing the width of a memory data bus, performing a dual-channel concurrent memory read operation, performing a dual-channel concurrent memory write operation, performing a write-cache memory write operation, and any combination thereof.
摘要:
A flash-drive or flash-card reader connects to a personal computer (PC) through a serial link such as a Universal-Serial-Bus (USB), IEEE 1394, SATA, or IDE. A local CPU acts as the bus master of a CPU bus that connects to slave ports on a flash-memory controller, a serial engine, and a RAM buffer. A second bus in parallel to the CPU bus connects a second slave port on the RAM buffer to a master port on the flash-memory controller and to a master port on the serial engine. The flash-memory controller or the serial engine can use their master ports to transfer data to and from the RAM buffer using the second bus, allowing the CPU to retain control of the CPU bus. The second bus is a flash-serial buffer bus that improves data transfer rates. The flash-memory controller can prefetch into the RAM buffer.
摘要:
A flash-drive or flash-card reader connects to a personal computer (PC) through a serial link such as a Universal-Serial-Bus (USB), IEEE 1394, SATA, or IDE. A local CPU acts as the bus master of a CPU bus that connects to slave ports on a flash-memory controller, a serial engine, and a RAM buffer. A second bus in parallel to the CPU bus connects a second slave port on the RAM buffer to a master port on the flash-memory controller and to a master port on the serial engine. The flash-memory controller or the serial engine can use their master ports to transfer data to and from the RAM buffer using the second bus, allowing the CPU to retain control of the CPU bus. The second bus is a flash-serial buffer bus that improves data transfer rates. The flash-memory controller can prefetch into the RAM buffer.
摘要:
An ExpressCard contains flash memory. The ExpressCard has an ExpressCard connector that plugs into a host, such as a personal computer, digital camera, or personal digital assistant (PDA). A controller chip on the ExpressCard uses a pair of differential Universal-Serial-Bus (USB) data lines in the connector to communicate with the USB host, or can use PCI Express, Firewire, or other protocols. One or more flash-memory chips on the ExpressCard are controlled by a flash-memory controller in the controller chip. Two or more channels of a flash bus have a shared control bus but separate ready lines. The separate ready lines allow flash-memory chips in the two channels to finish operations at different times.
摘要:
A PCI Express-compatible flash device can include one or more flash memory modules, a controller, and an ExpressCard interface. The controller can advantageously provide PCI Express functionality as well as flash memory operations, e.g. writing, reading, or erasing, using the ExpressCard interface. A PIO interface includes sending first and second memory request packets to the flash device. The first memory request packet includes a command word setting that prepares the flash device for the desired operation. The second memory request packet triggers the operation and includes a data payload, if needed. A DMA interface includes sending the second memory request from the flash device to the host, thereby triggering the host to release the system bus for the DMA operation.
摘要:
A dual-mode Universal-Serial-Bus (USB) switch can operate in a normal hub mode to buffer transactions from a host to multiple USB flash storage blocks that are USB endpoints. When operating in a single-endpoint mode, the dual-mode USB switch intercepts packets from the host and responds to the host as a single USB endpoint. The USB switch aggregates all downstream USB flash storage blocks and reports a single pool of memory to the host as a single virtual USB memory. Adjacent transactions can be overlapped by packet re-ordering. A token packet that starts a following transaction is re-ordered to be sent to the USB flash storage blocks before the data and handshake packets that end a first transaction, allowing the second transaction to begin accessing the flash memory earlier. Data can be mirrored or striped across several USB flash storage blocks and parity can be added for error recovery.
摘要:
A PCI Express-compatible flash device can include one or more flash memory modules, a controller, and an ExpressCard interface. The controller can advantageously provide PCI Express functionality as well as flash memory operations, e.g. writing, reading, or erasing, using the ExpressCard interface. A PIO interface includes sending first and second memory request packets to the flash device. The first memory request packet includes a command word setting that prepares the flash device for the desired operation. The second memory request packet triggers the operation and includes a data payload, if needed. A DMA interface includes sending the second memory request from the flash device to the host, thereby triggering the host to release the system bus for the DMA operation.
摘要:
A Flash storage device is disclosed. The Flash storage device comprises a plurality of memories and a printed circuit board coupled to the plurality of memories. The PCB is extended beyond a predetermined dimension to accommodate the plurality of memories. By extending the length and/or the width of the PCB, additional memories can be added to the PCB, thereby adding to the memory capacity of the device.
摘要:
A flash memory device for connecting to an ExpressCard™ host includes at least one flash memory module, an ExpressCard™ connector for connecting to the ExpressCard™ host, a first serial interface coupled to the ExpressCard™ connector, and a controller coupled to the first serial interface and the at least one flash memory module.