摘要:
An electric bower supply system includes a power supply controlling element (62) configured to switch a plug-out power supply which supplies electric power (75) from a fuel cell (20) or a battery (21) to a house (70) and a plug-in power supply which supplies electric power from a commercial power source (75) disposed in the house (70) to a fuel cell vehicle (1a) on the basis of a vehicular power state of the fuel cell (20) and the battery (21) detected by a vehicular power state detecting element (61) and a household power state of the commercial power source (75) detected by a household power state detecting element (81) when a receptacle (10) of the fuel cell vehicle (1a) and an outlet (71) of the commercial power source (75) have been connected by a power cable (100).
摘要:
Provided is a power system capable of supplying power steadily to the outside even at a low temperature. A power supply unit disposed in the power system is configured to calculate an amount of power needed to heat a fuel cell to a temperature threshold when the temperature thereof measured by an FC sensor is below the temperature threshold, set an SOC lower limit by adding the calculated amount of power to a discharge threshold of a secondary battery, and control the power supply to a first power supply portion in the range of the SOC lower limit.
摘要:
A fuel cell power supply device can include a fuel cell, a voltage boosting device with an input unit connected to the fuel cell, and an output unit connected to a first load. The boosting device can boost an output voltage and supply electric power to the first load. A storage device is connected to the input unit or the output unit, and a secondary battery can be connected to the output unit of the voltage boosting device via a voltage conversion device. An electric power supply control device controls operation of the voltage conversation device, to carry out supply of electric power to the first load from the secondary battery via the voltage conversion unit. The electric power supply control device also carries out charging of the secondary battery by the supply of electric power to the secondary battery from the voltage boosting device via the voltage conversion device.
摘要:
A fuel cell power supply device capable of externally supplying electric power in a stable manner is provided. The fuel cell power supply device includes a fuel cell (1), a capacitor (2) connected in parallel to the fuel cell, a voltage boosting means (3) having an input unit connected in parallel to the fuel cell and the capacitor and an output unit connected to a load (M), and for boosting the output voltages of the fuel cell and the capacitor to supply electric power by the boosted voltages to the load, a secondary battery (6) connected to the output unit of the voltage boosting means via a voltage conversion means (7), a first electric power supply unit (10) connected in parallel to the fuel cell and the capacitor and capable of externally supplying electric power, and an electric power supply control means (30) for controlling supply of electric power from the fuel cell, the capacitor, and the secondary battery to the first electric power supply unit, based on the output of the fuel cell and the charge levels of the capacitor and the secondary battery, in a range where the charge level of the capacitor is not lower than its discharge threshold value and the charge level of the secondary battery is not lower than its discharge threshold value.
摘要:
An electric double layer capacitor suppresses gas generation by decomposition of the electrolyte solution in the capacitor and has a superior performance maintaining ratio. In the electric double layer capacitor including activated carbon polarized electrodes and nonaqueous electrolyte solution, an antacid agent consisting of alkali metal salt of an organic acid is contained in the capacitor.
摘要:
To produce a carbonized product used for producing activated carbon for en electrode of an electric double-layer capacitor, a condensed polycyclic aromatic pitch having an optical anisotropic rate Oa in a range of 1%≦Oa≦90% and a softening point Ts in a range of 140° C.≦Ts≦260° C. is subjected to an oxygen crosslinking treatment at a heating temperature Th set at Th
摘要:
In a data holding mode, data storage in a one bit/one cell scheme in a normal operating mode are rearranged into data storage in a twin-cell mode in which data are stored in a one bit/two cell scheme. In the twin-cell mode, two sub word lines are simultaneously driven into a selected state, and storage data of memory cells are read out on both of bit lines in a pair, to perform a sense operation. Thus, the read-out voltage can be increased to improve the data retention characteristics for lengthening a refresh interval, resulting in a reduced power consumption in the data holding mode.
摘要:
A memory cell unit includes a first storage element and a second storage element for storing complementary data with each other. In a selected state, the first and second storage elements are connected to complementary bit lines, respectively at a time. In a standby state, the bit lines are precharged to a voltage (Vccs or GND) corresponding to the data stored in the memory cell unit. Refresh-free, low-current-consumption semiconductor memory device operating stably even under a low power supply voltage can be implemented.
摘要:
An image heating apparatus including: a first image heating unit for heating a toner image on a recording material; a second image heating unit for heating the toner image on the recording material heated by the first image heating unit; and a detecting unit for detecting a temperature of the first image heating unit, wherein the image heating apparatus is operable to a correcting mode in which a temperature of the second image heating unit is corrected in accordance with the detected temperature of the first image heating unit.
摘要:
A carbon material for an electric double layer capacitor in which a ratio of hydrogen atoms to carbon atoms, H/C, is not less than 0.2 and a true specific gravity is not less than 1.50 g/ml, is provided. Furthermore, a process for production of an activated carbon for an electric double layer capacitor in which a carbon material having a ratio of hydrogen atoms to carbon atoms, H/C, not less than 0.2, and a true specific gravity not less than 1.5 g/ml is activated, is provided.