摘要:
A laminated optical film including an optical film (1) whose three dimensional refractive index is controlled so that an Nz coefficient represented with Nz=(nx1−nz1)/(nx1−ny1) satisfies a relationship of Nz≦0.9, when a direction where a refractive index in a film plane gives maximum is defined as X-axis, a direction perpendicular to X-axis as Y-axis, a thickness direction of the film as Z-axis, and refractive indexes in each axial direction are defined as nx1, ny1, and nz1, respectively, and an optical film (2) that is formed with a material showing optically negative uniaxial property, and being tilting aligned.The laminated optical film may suppress coloring of the display, and may display a picture with few tone reversal regions.
摘要:
A multifunctional, high-performance hydrocarbon composition is demanded. Concretely, a metalworking oil composition having high workability even under a severer lubricating condition while resisting to high productivity, and further capable of suppressing deterioration of working environments or degradation of quality of a product without rise of lubricant cost, a metalworking oil composition for minimal quantitative lubrication system, which is excellent in characteristics as a water-insoluble lubricant for nonferrous metalworking and also in characteristics as a lubricant for cutting/grinding by minimal quantitative lubrication method, and can attain improvement in working efficiency and a further extended tool life, an electric discharge machining oil improved in working environments such as odor or skin roughness and further improved in processing rate, particularly processing rate in high-level finish, a rust preventing oil composition improved in resin compatibility, and a detergent excellent in adaptability with organic material are demanded.Therefore, metalworking oil which contains, as hydrocarbon base oil, hydrocarbon base oil having a density at 15° C. of 0.7 to 0.8 g/cm3, and including a n-paraffin content of 10 to 90% by mass, an aromatic content of 0 to 3% by volume, and a naphthene content of 0 to 20% by volume, a metalworking oil including the above-mentioned base oil and ester oil, and electric discharge machining oil, rust preventing oil, and a detergent composition including the above-mentioned base oil are provided.
摘要:
A laminated optical film comprising a first optical film(1) obtained by stretching a polymer film comprising a polycarbonate resin and a styrene resin, wherein the absolute value of photoelastic coefficient is 2.0×10−11 to 6.0×10−11 m2/N, and the three dimensional refractive index is controlled, a second optical film (2) showing optically positive uniaxial property that satisfies nx2>ny2≅nz2, and a third optical film (3) formed of a material showing optically negative uniaxial property, and the material comprising a part being angularly aligned, and the thickness of the film is 30 to 90 μm, enables inhibition of coloring of display image for observation of a display picture in a diagonal direction to normal line of a screen, and enables display of an image having little gradation inversion areas, and that has outstanding durability.
摘要:
The present invention provides: a carbon fiber sizing agent that can obtain a carbon fiber bundle having a superior effect of improving mechanical properties when composited using a resin; an aqueous dispersion thereof; a carbon fiber bundle; a sheet-shaped article having a carbon fiber bundle; and a composite material. The carbon fiber sizing agent contains: a compound (A) that is an ester of an unsaturated monobasic acid and an epoxy compound having a plurality of epoxy groups in the molecule, and that has at least one epoxy group in the molecule; a urethane acrylate oligomer (B) that is bifunctional and that has a tensile elongation rate of the cured product of at least 40%; and a polyurethane resin (C) having a tensile elongation rate of a dried coating film of 350-900% inclusive. The amounts of A-C contained satisfy the conditions described in the description. The aqueous dispersion disperses the sizing agent. The carbon fiber bundle contains 0.6-3.0 mass % inclusive of the sizing agent. The sheet-shaped article and a pultruded composite material contain the carbon fiber bundle. The composite material contains the sheet-shaped article.
摘要:
Provided is a carbon fiber bundle for obtaining a fiber-reinforced resin having high mechanical characteristics. A carbon fiber bundle formed of single carbon fibers, each of which has no uneven surface structure of 0.6 μm or more in length extending in the longitudinal direction of the single fiber; which has an uneven structure having a difference in height (Rp−v) of 5 to 25 nm between the highest portion and the lowest portion of the surface of the single fiber and having an average roughness Ra of 2 to 6 nm; and which has a ratio of the major axis to the minor axis (major axis/minor axis) of a cross-section of the single fiber of 1.00 to 1.01, wherein a mass of the single fiber per unit length falls within the range of 0.030 to 0.042 mg/m; a strand strength is 5900 MPa or more; a strand elastic modulus measured by the ASTM method is 250 to 380 GPa; and a knot tenacity is 900 N/mm2 or more.
摘要:
The present invention provides a refrigerating machine oil, a compressor oil composition, a hydraulic oil composition, a metalworking oil composition, a heat treating oil composition, a lubricating oil composition for machine tools and a lubricating oil composition which comprise a lubricating oil base oil having % CA of not more than 2, % CP/% CN of not less than 6 and an iodine value of not more than 2.5.
摘要:
An optical compensation layer-attached polarizing plate including a polarizing plate, an optical compensation layer and another optical compensation layer that are laminated in this order, wherein the optical compensation layer has the relation nx1>ny1=nz1, including a resin with a photoelastic coefficient absolute value of at most 2.0×10−11 m2/N, and has an in-plane retardation (nx1−ny1)d1 in the range of 200 nm to 300 nm, the optical compensation layer has the relation nx2>ny2>nz2, including a resin with a photoelastic coefficient absolute value of at most 2.0×10−11 m2/N, and has an in-plane retardation (nx2−ny2)d2 in the range of 90 nm to 160 nm, a slow axis of the optical compensation layer makes an angle of 10° to 30° with an absorption axis of the polarizing plate, and a slow axis of the optical compensation layer makes an angle of 75° to 95° with the absorption axis of the polarizing plate.
摘要:
An optical film obtained by stretching a polymer film comprising a polycarbonate resin and a styrene resin: wherein a photoelastic coefficient is 2.0×10−11 to 6.0×10−11 m2/N, and a three dimensional refractive index is controlled so that an Nz coefficient may satisfy a relationship of Nz≦0.9 and a front retardation (Re) may satisfy a relationship of Re≧80 nm, has characteristics of giving wide viewing angle and also outstanding durability.
摘要:
A terminal system having a video telephone equipment and a computer system. The video telephone equipment includes a communication unit connected to a line; a telephone unit for communicating with a remote station by speech via the communication unit and the line; and a camera unit for taking pictures and outputting video signals corresponding to the pictures. The video signals are transmitted to the remote station via the communication unit and the line. The video telephone equipment further includes a display unit for displaying images; and a processor for controlling the communication unit, the telephone unit, the camera unit and the display unit. The communication unit, the telephone unit, the camera unit, the display unit and the processor unit are coupled to each other by a first bus. The computer system includes a processor, coupled to an external unit by a second bus, for processing data supplied thereto via the second bus. The terminal system includes an interface circuit, coupled to the first and second buses, for intermediating between the video telephone equipment and the computer system so that data is transmitted from the computer system to the video telephone equipment via the interface means and vice versa.
摘要:
The present invention provides: a carbon fiber sizing agent that can obtain a carbon fiber bundle having a superior effect of improving mechanical properties when composited using a resin; an aqueous dispersion thereof; a carbon fiber bundle; a sheet-shaped article having a carbon fiber bundle; and a composite material. The carbon fiber sizing agent contains: a compound (A) that is an ester of an unsaturated monobasic acid and an epoxy compound having a plurality of epoxy groups in the molecule, and that has at least one epoxy group in the molecule; a urethane acrylate oligomer (B) that is bifunctional and that has a tensile elongation rate of the cured product of at least 40%; and a polyurethane resin (C) having a tensile elongation rate of a dried coating film of 350-900% inclusive. The amounts of A-C contained satisfy the conditions described in the description. The aqueous dispersion disperses the sizing agent. The carbon fiber bundle contains 0.6-3.0 mass % inclusive of the sizing agent. The sheet-shaped article and a pultruded composite material contain the carbon fiber bundle. The composite material contains the sheet-shaped article.