摘要:
Provided is a pipeline analog-to-digital converter (ADC) without a front-end sample-and-hold amplifier (SHA). To minimize a sampling error occurring between a flash ADC and a multiplying digital-to-analog converter (MDAC) of a first sub-ranging ADC due to removal of a front-end SHA, a delay time of a preamplifier included in the flash ADC is calculated, and the flash ADC samples an analog input signal later by the delay time than the MDAC. Accordingly, the pipeline ADC can minimize a sampling error without using a front-end SHA, and its chip area and power consumption can be reduced.
摘要:
A multi-stage Successive Approximation Register Analog-to-Digital Converter (SAR ADC) and an analog-to-digital converting method using the same are provided. The multi-stage SAR ADC connects small-size and low-power SAR ADCs in multiple stages, thereby reducing a whole chip size and power consumption. The analog-to-digital converting method simultaneously performs analog-to-digital conversions in the SAR ADCs connected in the multiple stages, thereby reducing an analog-to-digital conversion time and maintaining an operating rate of several tens of MHz to several hundreds of MHz similar to that of a pipeline ADC.
摘要:
A reference voltage supply circuit is provided. The reference voltage supply circuit includes a first amplifier for amplifying a first input voltage and a fed back first reference voltage, a second amplifier for amplifying a second input voltage and a fed back second reference voltage, a reference voltage generator for generating the first reference voltage and the second reference voltage according to output signals of the first and second amplifiers and feeding the first and second reference voltages back to the first and second amplifiers, and a glitch remover turned on/off according to an input pulse signal to conduct or cut off current flowing between a power supply terminal and the ground.
摘要:
A high-speed multi-stage voltage comparator is provided. The multi-stage voltage comparator is configured to eliminate offset from outputs of preamplifiers through respective offset-cancellation switches, and to reset the outputs of the preamplifiers through respective reset switches to reduce an output recovery time. Thus, the multi-stage voltage comparator operates with high accuracy and at a high speed, so that it can be usefully applied to an analog-to-digital converter (ADC), and particularly, a high-speed successive approximation register ADC (SAR ADC).
摘要:
A band-gap reference voltage generator is provided. N-channel metal oxide semiconductor (NMOS) transistors are respectively connected to bipolar transistors in parallel. A Complementary To Absolute Temperature (CTAT) voltage that is inversely proportional to absolute temperature is reduced by a threshold voltage of the NMOS transistor. A weight for a temperature coefficient of a Proportional To Absolute Temperature (PTAT) voltage that is directly proportional to absolute temperature is reduced and a resistance ratio for a temperature coefficient of 0 is reduced by about ½, thereby miniaturizing the band-gap reference voltage generator. A reference voltage lower than or equal to 1 V can be provided by resistors respectively connected to the bipolar transistors in parallel.
摘要:
A successive approximation resistor analog digital converter (SAR ADC) includes a first conversion unit including a correction capacitor array and a bit capacitor array 2V-1 less than the number of a bit, a second conversion unit configured to differentially operate with the first conversion unit, a comparator configured to output a voltage of a high level or a low level of each capacitor according to output voltages of the first and second conversion units, a successive approximation register (SAR) logic unit configured to receive an output voltage of the comparator to convert the received output voltage into a digital signal, and a correction logic unit configured to receive the digital signal converted by the SAR logic unit and to correct a digital signal of the bit capacitor array using a correction digital signal of the correction capacitor array of the received digital signal.
摘要:
A successive approximation resistor analog digital converter (SAR ADC) includes a first conversion unit including a correction capacitor array and a bit capacitor array 2ν-1 less than the number of a bit, a second conversion unit configured to differentially operate with the first conversion unit, a comparator configured to output a voltage of a high level or a low level of each capacitor according to output voltages of the first and second conversion units, a successive approximation register (SAR) logic unit configured to receive an output voltage of the comparator to convert the received output voltage into a digital signal, and a correction logic unit configured to receive the digital signal converted by the SAR logic unit and to correct a digital signal of the bit capacitor array using a correction digital signal of the correction capacitor array of the received digital signal.
摘要:
A multi-stage dual successive approximation register analog-to-digital converter (SAR ADC) and a method of performing analog-to-digital conversion using the same are provided. The multi-stage dual SAR ADC includes: a plurality of SAR ADC stages for converting an analog input voltage into a predetermined bit digital signal, each SAR ADC stage being serially connected to one another and including two SAR ADCs; and at least one residue amplifier respectively connected between every two successive SAR ADC stages, amplifying residue voltage output from a previous SAR ADC stage to output the amplified residue voltage to a next SAR ADC stage. The two SAR ADCs of the previous SAR ADC stage share the residue amplifier.
摘要:
A successive approximation register (SAR) analog-digital converter (ADC) and a method of driving the same are provided. The SAR ADC includes a first converting unit including a bit capacitor array corresponding to the number of bits and a correction capacitor array, a comparator outputting a high or low voltage corresponding to each capacitor according to an output voltage of the converting unit, and a correction unit correcting the output of the bit capacitor according to the output of the correction capacitor array among the high or low output of the comparator. Therefore, two bits having the same capacitance as a least significant bit (LSB) enable a digital output error to be corrected, so that a spurious free dynamic range (SFDR) of the signal converter is increased, and a signal to noise and distortion ratio (SNDR) of an output signal is improved.
摘要翻译:提供逐次逼近寄存器(SAR)模数转换器(ADC)及其驱动方法。 SAR ADC包括:第一转换单元,包括与位数相对应的位电容阵列和校正电容器阵列;比较器,根据转换单元的输出电压输出对应于每个电容器的高电压或低电压;以及校正 单元根据比较器的高或低输出中的校正电容器阵列的输出校正位电容器的输出。 因此,具有与最低有效位(LSB)相同的电容的两个位使得能够校正数字输出误差,使得信号转换器的无杂散动态范围(SFDR)增加,并且信噪比和失真比 (SNDR)的输出信号得到改善。
摘要:
A digital-to-analog converter (DAC) is provided. The DAC includes a positive converter, a negative converter, and a comparator for receiving outputs of the positive converter and the negative converter, comparing the outputs with a reference voltage, and generating an output voltage. Each of the positive converter and the negative converter includes an upper-bit converter including a plurality of bit capacitors corresponding to respective upper bits, a lower-bit converter including a plurality of bit capacitors corresponding to respective lower bits, and a coupling capacitor for connecting the upper-bit converter with the lower-bit converter in series. Each of the positive converter and the negative converter receives a bias voltage to have a uniform offset when converting the respective bits. Accordingly, it is possible to obtain a high resolution using a small area. Also, the number of capacitors can be reduced, and the capacitance of a unit capacitor can be maximized. Consequently, it is possible to minimize heat noise and device mismatching.