摘要:
The linear tuning range of a semiconductor varactor is substantially increased by forming a lightly-doped drain region of a first conductivity type in a semiconductor material of a second conductivity type between a heavily-doped diffusion of the second conductivity type and a lower-plate region of the semiconductor material.
摘要:
In an ESD protection circuit for an analog bipolar circuit, the avalanche breakdown voltage of a reverse-coupled NPN BJT acting as an avalanche diode is adjusted to comply with breakdown voltage and latchup requirements by including a resistor between the base and collector of the BJT.
摘要:
A DMOS transistor with a lower on-state drain-to-source resistance and a higher breakdown voltage utilizes a slanted super junction drift structure that lies along the side wall of an opening with the drain region at the bottom of the opening and the source region near the top of the opening.
摘要:
In a DIAC-like device that includes an n+ and a p+ region connected to the high voltage node, and an n+ and a p+ region connected to the low voltage node, at least two MOS devices are formed between the n+ and p+ region connected to the high voltage node, and the n+ and p+ region connected to the low voltage node.
摘要:
A MEMS magnetic flux switch is fabricated as a ferromagnetic core. The core includes a center cantilever that is fabricated as a free beam that can oscillate at a resonant frequency that is determined by its mechanical and material properties. The center cantilever is moved by impulses applied by an associated motion oscillator, which can be magnetic or electric actuators.
摘要:
In an ESD device for fast switching applications based on a BSCR or NLDMOS-SCR, an anode junction control electrode is provided by not connecting the anode electrode to the collector of the BSCR or to the drain of the NLDMOS-SCR, and a cathode junction control electrode is provided by forming an additional n+ region in the BSCR or an additional p+ region in the p-well of the NLDMOS-SCR. The triggering voltage of the ESD device is adjusted after a time delay by controlling one or both of the control electrodes using an RC-timer-driver circuit.
摘要:
In a SiGe BJT process, a diode is formed by defining a p-n junction between the BJT collector and BJT internal base, blocking the external gate regions of the BJT and doping the emitter poly of the BJT with the same dopant type as the internal base thereby using the emitter contact to define the contact to the internal base. Electrical contact to the collector is established through a sub-collector or by means of a second emitter poly and internal base both doped with the same dopant type as the collector.
摘要:
In a complementary SiGe bipolar process, a pnpn thyristor structure is formed from some of the layers of a pnp transistor and an npn transistor formed on top of each other and making use of the SiGe gates to define the blocking junction.
摘要:
In a low voltage ESD protection device, an extra control electrode is created by not connecting the n+ drain and p+ emitter regions of the LVTSCR, and controlling the control electrode by means of a diode connected NMOS.
摘要:
A vertical MOS transistor has a source region, a channel region, and a drain region that are vertically stacked, and a trench that extends from the top surface of the drain region through the drain region, the channel region, and partially into the source region. The vertical MOS transistor also has an insulation layer that lines the trench, and a conductive gate region that contacts the insulation layer to fill up the trench.